Abstract:A solution is sought for the buried interface issues within CsPbI2Br‐based perovskite solar cells. Addressing this, a multifunctional electron transporting layer (ETL) using a PbCl2‐modified ZnO nanocomposite is introduced. By tuning bandgap and energy levels, the ETL enhances energy alignment with CsPbI2Br. Integration of residual PbCl2 at the buried interface minimizes defects, ameliorating film quality. CsPbI2Br perovskite solar cells (PSCs) have garnered significant attention owing to their remarkable thermal stability and desirable bandgap. However, CsPbI2Br‐based devices still face critical challenges, particularly at the interfaces between the active layer and adjacent components. In this study, a multifunctional ZnO composition has developed as the electron transporting layer (ETL) for CsPbI2Br PSCs, enabling simultaneous efficient charge extraction and passivation of buried interface defects in CsPbI2Br. The nanocomposite, composed of PbCl2‐modified ZnO (PbCl2‐ZnO), facilitates the regulation of bandgap and conduction band to align the energy level of ETL and CsPbI2Br. Additionally, the residual PbCl2 at the buried interface of the perovskite incorporates into the perovskite lattice, reducing I defect and thus improving film quality. The improved energy level alignment at the ETL/CsPbI2Br interface and the suppressed I defect‐induced carrier nonradiative recombination result in a remarkable reduction in energy loss from 0.73 to 0.52 eV. Finally, the PbCl2‐ZnO hybrid nanocomposite ETL significantly enhances the efficiency of CsPbI2Br PSCs, increasing it from 14.15% to 17.46%, representing one of the highest reported power conversion efficiency (PCE) values for CsPbI2Br PSCs. These findings demonstrate the potential of PbCl2‐ZnO hybrid nanocomposite as an effective ETL for CsPbI2Br PSCs.

Interfacial Engineering by Multifunctional Ruthenium Complex for CsPbI2Br Perovskite Solar Cells with a Fill Factor over 0.82

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Regulating the Interplay at the Buried Interface for Efficient and Stable Carbon-Based CsPbI2Br Perovskite Solar Cells

Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability

An Interface Co-modification Strategy for Improving the Efficiency and Stability of CsPbI 3 Perovskite Solar Cells

Constructing an Interfacial Gradient Heterostructure Enables Efficient CsPbI3 Perovskite Solar Cells and Printed Minimodules

Crown Ether-Modified 1D/3D Heterojunction for Efficient and Stable Carbon-Based CsPbI 3 Perovskite Solar Cells

Achieving 17.46% Efficiency CsPbI2Br Perovskite Solar Cells via Multifunction Lead Chloride‐Modified ZnO Electron Transporting Layer

Hybrid CdSe/CsPbI3 quantum dots for interface engineering in perovskite solar cells

Perovskite bridging PbS quantum dot/polymer interface enables efficient solar cells

Bifunctional interfacial engineering enabled efficient and stable carbon-based CsPbIBr2 perovskite solar cells

Interfacial Voids Trigger Carbon-Based, All-Inorganic CsPbIBr2 Perovskite Solar Cells with Photovoltage Exceeding 1.33 V

Tailored Interfacial Crystal Facets for Efficient CH3NH3PbI3 Perovskite Solar Cells

Interfacial Passivation Engineering for Highly Efficient Perovskite Solar Cells with a Fill Factor over 83

Interface Engineering for All‐Inorganic CsPbIBr 2 Perovskite Solar Cells with Enhanced Power Conversion Efficiency over 11%

CsPbBr3 Nanocrystal Induced Bilateral Interface Modification for Efficient Planar Perovskite Solar Cells.

Surface Passivation of CsPbI 3 Films for Efficient and Stable Hole-Transporting Layer-Free Carbon-Based Perovskite Solar Cells

Interface studies of the planar heterojunction perovskite solar cells

Interfacial Bridging Enables High Performance Perovskite Solar Cells with Fill Factor over 85%

Resonant Molecular Modification for Energy Level Alignment in Perovskite Solar Cells

Bridging the buried interface with conjugated molecule for highly efficient carbon-based inorganic CsPbI 2 Br perovskite solar cells fabricated in air