Abstract:FeCrAl oxide dispersion strengthened (ODS) steel is regarded as one of the most promising candidate materials for nuclear fission reactors such as supercritical pressurized water reactor (SCPWR), sodium-cooled fast reactor (SFR), and lead bismuth-cooled fast reactor (LFR) and so on, since it has excellent irradiation resistance and good corrosion resistance of super-critical water and Pb–Bi coolants. In the present work, irradiation response of a Zr-added FeCrAl ODS steel (15Cr–4Al-0.1Ti-0.6Zr) together with an Al-free ODS (16Cr-0.1Ti) steel and a non-ODS steel T91 was studied. Electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to characterize the microstructures including grains, dislocations, and oxides in the pristine specimens and irradiation defects in the irradiated specimens. Nano-indentation tests were used to evaluate the change in hardness after irradiation. The oxides in the 15Cr–4Al-0.1Ti-0.6Zr specimen are slightly larger than those in the 16Cr-0.1Ti specimen, but with a similar number density. After irradiated with 9.45 MeV 83Bi35+ to 26 dpa at ambient temperature, hardening was observed in all the specimens. Irradiation hardening of the 15Cr–4Al-0.1Ti-0.6Zr specimen is slightly higher than the 16Cr-0.1Ti specimen but significantly lower than the non-ODS steel T91. The irradiation defects in the ODS steel specimens are apparently smaller than those in T91 with a similar number density. By calculating sink strength of the initial microstructures such as grains, dislocations and oxides, the evolution of irradiation defects was discussed. A linear relationship between the irradiation hardening and the sink strength was established. A similar linear relationship between the calculated irradiation hardening using the TEM data (based on dispersion barrier hardening model (DBH) and Friedel-Kroupa-Hirsch (FKH) model, respectively) and sink strength was also found. The calculated irradiation hardening is relatively lower than the experimental value, indicating the possible contribution of Cr segregation to hardening which needs further study.

The New Experimental Method for Measuring the Stability of Incoherent Nanoparticles in ODS Steel Using High-Resolution High Voltage Microscopy

Atomic Scale Stability of Tungsten-Cobalt Intermetallic Nanocrystals in Reactive Environment at High Temperature.

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Study of Precipitates in Oxide Dispersion-Strengthened Steels by SANS, TEM, and APT

Microstructure evolution and void swelling of ODS ferritic/martensitic steel under high damage irradiation

Molecular Dynamics Simulation Study on the Possible Factors Affecting Stability of ODS Steel

Formation and Microstructural Evolution of Ferritic ODS Steel Powders during Mechanical Alloying

Mechanical and Raman spectroscopic studies of multi-ion-beam irradiated 12,18Cr-oxide dispersion strengthened steels

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

Kinetic Monte Carlo Modelling of Nano-oxide Precipitation and its Associated Stability under Neutron Irradiation for the Fe-Ti-Y-O system

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Microstructure, Grain Growth and Hardness of Nanostructured Ferritic ODS Steel Powder during Annealing

Effects of Fe self-ion irradiation on a low carbon MX-ODS steel at 550 degrees C

Effects of Fe self-ion irradiation on a low carbon MX-ODS steel at 550C

In Situ Study on Stability of Copper Oxide Nanomaterials by E-Beam Irradiation

In-Situ Synchrotron Investigation of the Elastic and Tensile Properties of Oxide Dispersion Strengthened EUROFER97 Steel

Thermal stability and sputtering resistance under irradiation of yttria dispersed ferrum films

Probing the meta-stability of oxide core/shell nanoparticle systems at atomic resolution

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Cost-Effective Thermomechanical Processing of Nanostructured Ferritic Alloys: Microstructure and Mechanical Properties Investigation