Abstract:3D Concrete Printing (3DCP) is considered a solution to confront both labor shortages and material waste in the construction industry. However, to realize non-standard, large-scale buildings, substantial amounts of supporting material and manual assembly are still required to print structures with significant overhangs, including the inclined structure and the cantilever structure. In response, the study draws inspiration from mushroom lamellae and proposes a geometry-based approach to adjusting the large-overhang shape into a self-supported one. This approach imitates lamella morphology by creating folds on the given geometry based on constraints established through empirical studies, thereby reducing overhangs and improving printability. Specifically, the proposed approach includes two shape variation methods. The first method generates lamellae perpendicular to the inclined shape, thereby providing lateral support to the filament. The second method creates lamellae under the cantilever, facilitating a seamless horizontal-to-vertical transition. The effectiveness of these methods is demonstrated through the generation and printing of four column capital samples. Upon evaluating the overhang mechanisms of these geometries, an approachable optimization method is also presented to further minimize the amplitude of lamellae while maintaining self-supporting ability. Compared with control groups that focus on either maximizing printability or minimizing material usage, the optimal result for the inclined structure prototype showcases an over 75 % overhang reduction on the critical layer with just about 15 % use of additional material. As for the cantilever prototype, an over 75 % overhang reduction is achieved on the critical layer with about 35 % additional material usage. Various large-scale structure examples are presented at the end of the research, illustrating the applicability and scalability of the lamella-inspired method in a wider range of building types.

Mass-customization of Integrated Green Wall Building Blocks Through Clay Printing Formwork

Robotic Fabrication of Sustainable Hybrid Formwork with Clay and Foam for Concrete Casting

Digital Planting - Fabrication of Integrated Concrete Green Wall via Additive Manufacturing

The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms

Upscaling earth formworks: 3D printing strategies for material optimised reinforced concrete structures

The State of the Art in Digital Construction of Clay Buildings: Reviews of Existing Practices and Recommendations for Future Development

Fabrication of Topology Optimized Concrete Components Utilizing 3D Printed Clay Mould

Toward automated construction: The design-to-printing workflow for a robotic in-situ 3D printed house

Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multimodal Analysis

Inforigami: A Computer-aided Design Method for Introducing Traditional Perforated Boneless Lantern Craft to Everyday Interfaces

Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete

Large-scale 3D wall printing: From concept to reality

Inclined 3D concrete printing: build-up prediction and early-age performance optimization

Self-Supporting Lamellae: Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures

Global continuous path planning for 3D concrete printing multi-branched structure

3D Printed Concrete Walls Reinforced with Flexible FRP Textile: Automatic Construction, Digital Rebuilding, and Seismic Performance

An integrated method of topological optimization and path design for 3D concrete printing

A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

3D Printing Plastic Molds for Repeatable Casting of Mortarless Topological Interlocking Assemblies

BIM-enabled collaborative-robots 3D concrete printing to construct MiC with reinforcement

Mechanical behaviors of 3D printed lightweight concrete structure with hollow section