Abstract:The deformation-induced surface roughening of an Al-Mg alloy is analyzed using a combination of experiments and modeling. A mesoscale oligocrystal of AA5052-O, obtained by recrystallization annealing and subsequent thickness reduction by machining, that contains approx. 40 grains is subjected to uniaxial tension. The specimen contains one layer of grains through the thickness. A laser confocal microscope is used to measure the surface topography of the deformed specimen. A finite element model with realistic (non-columnar) shapes of the grains based on a pair of Electron Back-Scatter Diffraction (EBSD) scans of a given specimen is constructed using a custom-developed shape interpolation procedure. A Crystal Plasticity Finite Element (CPFE) framework is then applied to the voxel model of the tension test of the oligocrystal. The unknown material parameters are determined inversely using an efficient, custom-built optimizer. Predictions of the deformed shape of the specimen, surface topography, evolution of the average roughness with straining and texture evolution are compared to experiments. The model reproduces the averaged features of the problem, while missing some local details. As an additional verification of the CPFE model, the statistics of surface roughening are analyzed by simulating uniaxial tension of an AA5052-O polycrystal and comparing it to experiments. The averaged predictions are found to be in good agreement with the experimentally observed trends. Finally, using the same polycrystalline specimen, texture–morphology relations are discovered, using a symbolic Monte Carlo approach. Simple relations between the Schmid factor and roughness can be inferred purely from the experiments. Novelties of this work include: realistic 3D shapes of the grains; efficient and accurate identification of material parameters instead of manual tuning; a fully analytical Jacobian for the crystal plasticity model with quadratic convergence; novel texture–morphology relations for polycrystal.

Plastic Deformation in Surface Indentation of Magnesium Oxide Single Crystal

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

Numerical and Experimental Studies of Deep Indentation on Single Crystals

MACRO- AND MICROSCOPIC APPROACHES TO PLANE STRAIN DEFORMATION STATES OF FACE-CENTERED CUBIC METALS UNDER WEDGE INDENTATION

Analysis of Stress and Deformation States in Wedge Indented Face-Centered Cubic Single Crystals

Plastic deformation mechanisms during nanoindentation of W, Mo, V body-centered cubic single crystals and their corresponding W-Mo, W-V equiatomic random solid solutions

Plastic deformation of magnesium single crystal: a crystal plasticity coupled twinning phase field simulation

Crystal Plasticity Behavior of Single-Crystal Pure Magnesium under Plane-Strain Compression

On the Plasticity and Deformation Mechanisms in Magnesium Crystals

Mechanical Behavior in the Interior and Boundary of Magnesium Aluminate Spinel (mgal2o4) Grain under Nanoindentation.

Molecular dynamics simulation on plasticity deformation mechanism and failure near void for magnesium alloy

In-situ Analysis of Microscopic Plastic and Failure Behaviors of Extruded Magnesium Alloy

Investigation of Grain Subdivision at Very Low Plastic Strains in A Magnesium Alloy

Orientation dependence of intracrystalline and grain boundary deformation behavior in Mg-2Y using nanoindentation and CPFEM

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

Influence of surface pre-deformation on the Portevin-Le Chatelier effect and the related multiscale complexity of plastic flow in an Al-Mg alloy

Molecular dynamics simulation on plastic deformation and failure mechanisms around a crack tip for magnesium alloys

Mechanical properties and deformation mechanisms of single crystal Mg micropillars subjected to high-strain-rate C-axis compression

Direct in situ observation of metallic glass deformation by real-time nano-scale indentation

Insight into indentation-induced plastic flow in austenitic stainless steel

Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach