Abstract:This paper presents a 14-bit hybrid column-parallel compact analog-to-digital converter (ADC) for the application of digital infrared focal plane arrays (IRFPAs) with compromised power and speed performance. The proposed hybrid ADC works in two phases: in the first phase, a 7-bit successive approximation register (SAR) ADC performs coarse quantization; in the second phase, a 7-bit single-slope (SS) ADC performs fine quantization to complete the residue voltage conversion. In this work, the number of unit capacitors is reduced to 1/128th of that of a conventional 14-bit SAR ADC, which is beneficial for the application of small pixel-pitch IRFPAs. In this work, a tradeoff segmented thermometer-coded digital-to-analog converter (DAC) is adopted in the first 7-bit coarse quantization process: the lower 3-bit is binary coded, and the upper 4-bit is thermometer coded. A thermometer-coded DAC can improve the linearity of ADC. Capacitor array matching can be incredibly relaxed compared with a binary-weight 14-bit SAR ADC, resulting in a noncalibration feature. Moreover, by sharing DAC and comparator analog circuits between the SAR ADC and the SS ADC, the power consumption and layout area are consequently reduced. The proposed hybrid ADC was fabricated using a 180 nm CMOS process. The measurement results show that the proposed ADC has a differential nonlinearity of −0.61/+0.84 LSB and a sampling rate of 120 kS/s. The developed ADC achieves a temporal noise of 1.7 LSBrms at a temperature of 77 K. In addition, the SNDR is 72.9 dB, and the ENOB is 11.82 bit, respectively. Total power consumption is 71 μW from supply voltages of 3.3 V (analog) and 1.8 V (digital).

A 14-Bit Digital to Analog Converter for a Topmetal-CEE Pixel Readout Chip

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

Design of a 12 bit High-Stability Digital-to-Analog Converter

Development of a highly pixelated direct charge sensor, Topmetal-I, for ionizing radiation imaging

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

A Low-Noise CMOS Pixel Direct Charge Sensor Topmetal-IIa for Low Background and Low Rate- Density Experiments

The Topmetal-CEE Prototype, a Direct Charge Sensor for the Beam Monitor of the CSR External-Target Experiment

Development of a Pixel Readout ASIC for CZT Detectors for Spectral X-ray Photon-Counting Imaging Applications

A 16-Bit Two-Stage ADC for 320×256 Infrared Focal Plane Array

A Low-Noise CMOS Pixel Direct Charge Sensor, Topmetal-II-

A Highly Pixelated Cdznte Detector Based on Topmetal-Ii- Sensor

COLUTA: Custom 8-Channel 15-Bit 40-MSPS ADC for the ATLAS Liquid Argon Calorimeter Readout

Design and test results of a low-noise readout ASIC for pixelated CdZnTe detectors

A 15-Bit Two-Step Pixel-Level ADC for 17&Amp;#x03bc;m-Pitch Low-Power and High-Dynamic-range IRFPA

A 16-bit Hybrid ADC with Circular-Adder-Based Counting for 15m Pitch 640x512 LWIR FPAs

50.3 ps time resolution and an 11-channel time measuring chip for Topmetal detectors

A 14-Bit Hybrid Analog-to-Digital Converter for Infrared Focal Plane Array Digital Readout Integrated Circuit

Design of an SHA-Less Pipeline ADC with Op-Amp Sharing Techniques for MAPS

Design and Preliminary Characterization of a Novel Silicon Charge Sensor for the Gaseous Beam Monitor at the CSR External-Target Experiment

A 16-Bit Two-Step Pixel-Level ADC for 384∗288 Infrared Focal Plane Array

A Pixel Readout Circuit for Hybrid SDD and CMOS Technology