Abstract:ATLAS LAr calorimeter will undergo its Phase-I upgrade during the long shutdown (LS2) in 2018, and a new LAr Trigger Digitizer Board (LTDB) will be designed and installed. Several commercial-off-the-shelf (COTS) multi-channel high-speed ADCs have been selected as possible backups of the radiation tolerant ADC ASICs for the LTDB. To evaluate the radiation tolerance of these backup commercial ADCs, we developed an ADC radiation tolerance characterization system, which includes the ADC boards, data acquisition (DAQ) board, signal generator, external power supplies and a host computer. The ADC board is custom designed for different ADCs, with ADC drivers and clock distribution circuits integrated on board. The Xilinx ZC706 FPGA development board is used as a DAQ board. The data from the ADC are routed to the FPGA through the FMC (FPGA Mezzanine Card) connector, de-serialized and monitored by the FPGA, and then transmitted to the host computer through the Gigabit Ethernet. A software program has been developed with Python, and all the commands are sent to the DAQ board through Gigabit Ethernet by this program. Two ADC boards have been designed for the ADC, ADS52J90 from Texas Instruments and AD9249 from Analog Devices respectively. TID tests for both ADCs have been performed at BNL, and an SEE test for the ADS52J90 has been performed at Massachusetts General Hospital (MGH). Test results have been analyzed and presented. The test results demonstrate that this test system is very versatile, and works well for the radiation tolerance characterization of commercial multi-channel high-speed ADCs for the upgrade of the ATLAS LAr calorimeter. It is applicable to other collider physics experiments where radiation tolerance is required as well.

COLUTA: Custom 8-Channel 15-Bit 40-MSPS ADC for the ATLAS Liquid Argon Calorimeter Readout

A radiation-hard dual-channel 12-bit 40 MS/s ADC prototype for the ATLAS liquid argon calorimeter readout electronics upgrade at the CERN LHC

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

Development of an ADC radiation tolerance characterization system for the upgrade of the ATLAS LAr calorimeter

Development of COTS ADC SEE Test System for the ATLAS LAr Calorimeter Upgrade

Chips for calibration of the ATLAS Liquid Argon calorimeter

Design of a Time-to-Digital Converter ASIC and a mini-DAQ system for the Phase-2 upgrade of the ATLAS Monitored Drift Tube detector

Development of a Time-to-digital Converter ASIC for the Upgrade of the ATLAS Monitored Drift Tube Detector

A Fully Integrated 10-Bit 100 MS/s SAR ADC with Metastability Elimination for the High Energy Physics Experiments

Design and simulation of a 12-bit, 40 MSPS asynchronous SAR ADC for the readout of PMT signal

Design of a Prototype Analog Front-End ASIC for the LGAD Readout

A Low-Power Time-to-Digital Converter for the CMS Endcap Timing Layer (ETL) Upgrade

Design and performance of a TDC ASIC for the upgrade of the ATLAS Monitored Drift Tube detector

A 12 bit analog to digital converter for VLSI applications in nuclear science

A Data Acquisition System for HV-CMOS Sensor Research and Development in the Upgrade of ATLAS Experiment.

Characterization of the CMS Endcap Timing Layer Readout Chip Prototype with Charge Injection

A Highly Linear FPGA-Based TDC and a Low-Power Multichannel Readout ASIC with a Shared SAR ADC for SiPM Detectors

A Low-Latency, Low-Overhead Encoder for Data Transmission in the ATLAS Liquid Argon Calorimeter Trigger Upgrade

The SALT—Readout ASIC for Silicon Strip Sensors of Upstream Tracker in the Upgraded LHCb Experiment

Test and performance of the LiTE-DTU ASIC for the HL-LHC upgrade of the CMS ECAL barrel

FATALIC: A novel CMOS front-end readout ASIC for the ATLAS Tile Calorimeter