Abstract:ATLAS LAr calorimeter will undergo its Phase-I upgrade during the long shutdown (LS2) in 2018, and a new LAr Trigger Digitizer Board (LTDB) will be designed and installed. Several commercial-off-the-shelf (COTS) multi-channel high-speed ADCs have been selected as possible backups of the radiation tolerant ADC ASICs for the LTDB. To evaluate the radiation tolerance of these backup commercial ADCs, we developed an ADC radiation tolerance characterization system, which includes the ADC boards, data acquisition (DAQ) board, signal generator, external power supplies and a host computer. The ADC board is custom designed for different ADCs, with ADC drivers and clock distribution circuits integrated on board. The Xilinx ZC706 FPGA development board is used as a DAQ board. The data from the ADC are routed to the FPGA through the FMC (FPGA Mezzanine Card) connector, de-serialized and monitored by the FPGA, and then transmitted to the host computer through the Gigabit Ethernet. A software program has been developed with Python, and all the commands are sent to the DAQ board through Gigabit Ethernet by this program. Two ADC boards have been designed for the ADC, ADS52J90 from Texas Instruments and AD9249 from Analog Devices respectively. TID tests for both ADCs have been performed at BNL, and an SEE test for the ADS52J90 has been performed at Massachusetts General Hospital (MGH). Test results have been analyzed and presented. The test results demonstrate that this test system is very versatile, and works well for the radiation tolerance characterization of commercial multi-channel high-speed ADCs for the upgrade of the ATLAS LAr calorimeter. It is applicable to other collider physics experiments where radiation tolerance is required as well.

Test and performance of the LiTE-DTU ASIC for the HL-LHC upgrade of the CMS ECAL barrel

Test and performance of the CMS ECAL barrel data conversion and digital processing ASIC for HL-LHC

First test results of the HGCAL concentrator ASICs: ECON-T and ECON-D

Design and performance of a TDC ASIC for the upgrade of the ATLAS Monitored Drift Tube detector

Design of a Time-to-Digital Converter ASIC and a mini-DAQ system for the Phase-2 upgrade of the ATLAS Monitored Drift Tube detector

A Low-Power Time-to-Digital Converter for the CMS Endcap Timing Layer (ETL) Upgrade

The upgrade of the CMS electromagnetic calorimeter for HL-LHC

On-beam system test of the new readout electronics for the CMS Electromagnetic Calorimeter upgrade

CMS ECAL VFE design, production and testing

Development of a Time-to-digital Converter ASIC for the Upgrade of the ATLAS Monitored Drift Tube Detector

Optical Link ASICs for the LHC Upgrade

Design of a Prototype Analog Front-End ASIC for the LGAD Readout

COLUTA: Custom 8-Channel 15-Bit 40-MSPS ADC for the ATLAS Liquid Argon Calorimeter Readout

The optimization, design and performance of the FBCM23 ASIC for the upgraded CMS beam monitoring system

Development of COTS ADC SEE Test System for the ATLAS LAr Calorimeter Upgrade

Characterization of the ATLAS Liquid Argon Front-End ASIC ALFE2 for the HL-LHC upgrade

Development of the Beam Conditions Monitoring Prime system for beam abort and luminosity monitoring in ATLAS based on a segmented polycrystalline CVD diamond system and dedicated front-end ASIC

Development of an ADC radiation tolerance characterization system for the upgrade of the ATLAS LAr calorimeter