Abstract:Electrocatalytic reduction has recently received increasing attention as a method of converting waste nitrate into value-added ammonia, but most studies have focused on complex strategies of catalyst preparation and little has been done in the way of large-scale demonstrations. Herein, we report that in situ activation of a pristine Ni electrode, either on a lab scale or a pilot scale, is effective in facilitating nitrate reduction to ammonia, exhibiting extraordinarily high activity, selectivity, and stability. The self-activated Ni cathode has a robust capacity to reduce nitrate over a wide range of concentrations and achieves great conversion yield, NH4+–N selectivity, and Faradaic efficiency, respectively, 95.3, 95.5, and 64.4% at 200 mg L–1 NO3––N and 97.8, 97.1, and 90.4% at 2000 mg L–1 NO3––N, for example. Fundamental research indicates that Ni(OH)2 nanoparticles are formed on the Ni electrode surface upon self-activation, which play crucial roles in governing nitrate reduction reaction (NO3RR) through the atomic H*-mediated pathway and accordingly suppressing hydrogen evolution reaction. More importantly, the self-activated Ni(OH)2@Ni cathode can be easily scaled up to allow large volumes of real industrial wastewater to be processed, successfully transferring nitrate into ammonia with high yields and Faradaic efficiency. This study demonstrates a new, mild, and promising method of cleaning nitrate-laden wastewater that produces ammonia as a valuable byproduct.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.1c02278.Quantification of the concentration of 15NH4+-N by 1H NMR spectroscopy, material characterizations, chemical analysis, electrochemical measurements, calculations of the conversion efficiency (%), product selectivity of (%), Faradaic efficiency (%), and the ECSA, DFT calculations, water quality parameters, variations in the values of cell voltage, comparisons of NH4+-N selectivity and Faradaic efficiency between this study and the literature, schematic diagram of the pilot-scale process flow for nitrate wastewater treatment, photos of the electrolytic reactor, comparisons of plots of –ln(Ct/C0) versus time, CV curves, corresponding capacitive currents, and specific activity between the pristine and the self-activated Ni foam electrodes, variations in the pH values as a function of time at different electrolysis cycles, leaching of Ni2+ during the in situ activation process, variations in the concentrations of NH4+–N and NO3––N at different initial concentrations of NO3––N, QS-XPS survey spectra of Ni foam at different electrolysis cycles, XRD patterns, O 1s and Ni 2p QS-XPS spectra, LSV and CV curves, variations in ECSA-normalized LSV curves, and variations in the concentrations of NH4+–N and NO3––N in the real wastewater (PDF)This article has not yet been cited by other publications.

In-situ Electrochemical Upcycling Ammonia from Wastewater-Level Nitrate with a Natural Hematite Electrode: Regulation, Performance, and Application

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low‐Concentration Sewage

Electrochemical Nitrate Reduction to Ammonia on Copper-Based Materials for Nitrate-Containing Wastewater Treatment.

Nitrogen-based fertilizer recovery from nitrate wastewater: A novel electrocatalyst for ammonia synthesis and a new strategy for ammonia absorption

Defect-engineered TiO2 nanotube cathode for nitrate reduction to ammonia and upcycling into (NH4)2SO4 in the paired electrolysis system

Renewable energy driven electroreduction nitrate to ammonia and in-situ ammonia recovery via a flow-through coupled device

Electrochemically Reconstructed Copper-Polypyrrole Nanofiber Network for Remediating Nitrate-Containing Water at Neutral Ph

Self-Activated Ni Cathode for Electrocatalytic Nitrate Reduction to Ammonia: From Fundamentals to Scale-Up for Treatment of Industrial Wastewater

Sustainable conversion of alkaline nitrate to ammonia at activities greater than 2 A cm-2

High-Performance Electrochemical Nitrate Reduction to Ammonia under Ambient Conditions Using a FeOOH Nanorod Catalyst

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Electrocatalytic upcycling of nitrate and hydrogen sulfide via a nitrogen-doped carbon nanotubes encapsulated iron carbide electrode

A novel electrochemical membrane filtration system operated with periodical polarity reversal for efficient resource recovery from nickel nitrate laden industrial wastewater

Ammonia recovery from nitrate-rich wastewater using a membrane-free electrochemical system

Highly Selective Electrochemical Reduction Of Dinitrogen To Ammonia At Ambient Temperature And Pressure Over Iron Oxide Catalysts

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte

Grave-to-Cradle Upcycling of Harmful Algal Biomass into Atomically Dispersed Iron Catalyst for Efficient Ammonia Electrosynthesis from Nitrate

Electrochemical Nitrate Reduction to Ammonia – Recent Progress