Abstract:Ammonia is a common pollutant, present in municipal wastewater streams. With the continuous shift of people moving to cities and the growing world's population, the overall wastewater amount is rising. Current ammonia treatment processes in wastewater treatment plants include biological nitrification. Here the ammonia is converted to nitrate or nitrogen. Unfortunately, the capital and operational expenditure costs of such processing are high and the ammonia is converted to products that have no value. Ammonia is a carbon-free energy carrier. Recently, technological solutions have been introduced to strip ammonia from wastewater [1]. The recovered ammonia can be electrochemically oxidised to benign nitrogen in an electrolyser, which can offer a cost-efficient technology to couple wastewater remediation at an anode with the production of a valuable by-product at the cathode, hydrogen. Currently, the commercialisation of the ammonia electrolyser technology is hindered by slow reactions at the anode and the cathode as well as the deactivation or degradation of the catalysts over time [2,3]. Consequently, the development of inexpensive, efficient anode material is imperative to reduce costs associated with ammonia destruction and electrochemical hydrogen production. This study focuses on a non-noble metal NiCu catalyst as a durable anode for alkaline ammonia electrolysis. We report that nickel-copper catalysts can oxidise ammonia to nitrogen at room temperature, see figure below. During electrolysis experiments, gas chromatography of the off-gases confirmed that both, nitrogen at the anode and hydrogen at the cathode, are generated with high faradaic efficiencies. Anode morphology and structure before and after electrolysis was investigated by X-ray diffraction (XRD), X-ray fluorescence (XRF), X-ray Photoelectron Spectroscopy (XPS), and scanning electron microscopy (SEM). To monitor possible intermediates produced by electrolysis, the electrolyte was analysed for NOx regularly by cuvette test and the electrode off-gasses were continuously monitored by GC-TCD. Overall, the electrode showed stability after continuous electrolysis in ammonia for over 30 hours. Further results will be presented at the conference. References: [1] L. Kinidi, I.A.W. Tan, N.B. Abdul Wahab, K.F.B. Tamrin, C.N. Hipolito, S.F. Salleh, Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment, International Journal of Chemical Engineering. 2018 (2018) 1–14. https://doi.org/10.1155/2018/3181087. [2] B. Zhou, N. Zhang, Y. Wu, W. Yang, Y. Lu, Y. Wang, S. Wang, An option for green and sustainable future: Electrochemical conversion of ammonia into nitrogen, Journal of Energy Chemistry. 60 (2021) 384–402. https://doi.org/10.1016/j.jechem.2021.01.011. [3] N.M. Adli, H. Zhang, S. Mukherjee, G. Wu, Review—Ammonia Oxidation Electrocatalysis for Hydrogen Generation and Fuel Cells, J. Electrochem. Soc. 165 (2018) J3130–J3147. https://doi.org/10.1149/2.0191815jes. Figure 1

Grave-to-Cradle Upcycling of Harmful Algal Biomass into Atomically Dispersed Iron Catalyst for Efficient Ammonia Electrosynthesis from Nitrate

A Sustainable Approach: Repurposing Harmful Algal Biomass As Carbon-Based Catalysts for Nitrogen Fertilizer Electrosynthesis from Nitrate and CO2

Grave-to-cradle upcycling of Ni from electroplating wastewater to photothermal CO 2 catalysis

High‐performance Ammonia Electrosynthesis from Nitrate in a NaOH‐KOH‐H2O Ternary Electrolyte

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Efficient Ammonia Electrosynthesis from Nitrate on Non-Noble Fe/CeO2 Catalyst

N-doped Carbon–iron Heterointerfaces for Boosted Electrocatalytic Active and Selective Ammonia Production

Enhanced Electrocatalytic Conversion of Nitrates to Ammonia: Fuel from Waste

Enhanced Nitrate-to-Ammonia Conversion through Ag-Cu-P Catalyst for Sustainable Ammonia Generation under Ambient Conditions

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

Electrochemical ammonia synthesis via nitrate reduction on Fe single atom catalyst

Active Hydrogen Tuning by Copper-Cobalt Bimetal Catalysts for Boosting Ammonia Electrosynthesis from Simulated Waster Water

Enhanced Nitrate‐to‐Ammonia Activity on Fe/ZnO Nanoparticles via Tuning Intermediate Adsorption in Alkaline Electrolyte

Highly Selective Electrochemical Reduction Of Dinitrogen To Ammonia At Ambient Temperature And Pressure Over Iron Oxide Catalysts

Sustainable conversion of alkaline nitrate to ammonia at activities greater than 2 A cm-2

Highly dispersed copper-iron nanoalloy enhanced electrocatalytic reduction coupled with plasma oxidation for ammonia synthesis from ubiquitous air and water

Reactive Separation of Ammonia from Wastewater Nitrate via Molecular Electrocatalysis

Electrocatalytic upcycling of nitrate and hydrogen sulfide via a nitrogen-doped carbon nanotubes encapsulated iron carbide electrode

Intentional corrosion-induced reconstruction of defective NiFe layered double hydroxide boosts electrocatalytic nitrate reduction to ammonia

(Digital Presentation) Electrocatalytic Ammonia Oxidation Coupled with Hydrogen Production - Moving Towards a Carbon Neutral Water Treatment Cycle

Direct recovery of electro-synthesized ammonia from low-concentration nitric oxide using pulse electrodeposited Cu/C catalyst in a catholyte-free system