Abstract:Electrocatalytic reduction has recently received increasing attention as a method of converting waste nitrate into value-added ammonia, but most studies have focused on complex strategies of catalyst preparation and little has been done in the way of large-scale demonstrations. Herein, we report that in situ activation of a pristine Ni electrode, either on a lab scale or a pilot scale, is effective in facilitating nitrate reduction to ammonia, exhibiting extraordinarily high activity, selectivity, and stability. The self-activated Ni cathode has a robust capacity to reduce nitrate over a wide range of concentrations and achieves great conversion yield, NH4+–N selectivity, and Faradaic efficiency, respectively, 95.3, 95.5, and 64.4% at 200 mg L–1 NO3––N and 97.8, 97.1, and 90.4% at 2000 mg L–1 NO3––N, for example. Fundamental research indicates that Ni(OH)2 nanoparticles are formed on the Ni electrode surface upon self-activation, which play crucial roles in governing nitrate reduction reaction (NO3RR) through the atomic H*-mediated pathway and accordingly suppressing hydrogen evolution reaction. More importantly, the self-activated Ni(OH)2@Ni cathode can be easily scaled up to allow large volumes of real industrial wastewater to be processed, successfully transferring nitrate into ammonia with high yields and Faradaic efficiency. This study demonstrates a new, mild, and promising method of cleaning nitrate-laden wastewater that produces ammonia as a valuable byproduct.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.1c02278.Quantification of the concentration of 15NH4+-N by 1H NMR spectroscopy, material characterizations, chemical analysis, electrochemical measurements, calculations of the conversion efficiency (%), product selectivity of (%), Faradaic efficiency (%), and the ECSA, DFT calculations, water quality parameters, variations in the values of cell voltage, comparisons of NH4+-N selectivity and Faradaic efficiency between this study and the literature, schematic diagram of the pilot-scale process flow for nitrate wastewater treatment, photos of the electrolytic reactor, comparisons of plots of –ln(Ct/C0) versus time, CV curves, corresponding capacitive currents, and specific activity between the pristine and the self-activated Ni foam electrodes, variations in the pH values as a function of time at different electrolysis cycles, leaching of Ni2+ during the in situ activation process, variations in the concentrations of NH4+–N and NO3––N at different initial concentrations of NO3––N, QS-XPS survey spectra of Ni foam at different electrolysis cycles, XRD patterns, O 1s and Ni 2p QS-XPS spectra, LSV and CV curves, variations in ECSA-normalized LSV curves, and variations in the concentrations of NH4+–N and NO3––N in the real wastewater (PDF)This article has not yet been cited by other publications.

Defect-engineered TiO2 nanotube cathode for nitrate reduction to ammonia and upcycling into (NH4)2SO4 in the paired electrolysis system

Electrocatalytic Upcycling of Nitrate Wastewater into an Ammonia Fertilizer via an Electrified Membrane.

Nano-Polycrystalline Cu Layer Interlaced with Ti3+-Self-Doped TiO2 Nanotube Arrays as an Electrocatalyst for Reduction of Nitrate to Ammonia

Upcycling wastewater nitrate into ammonia fertilizer via concurrent electrocatalysis and membrane extraction

A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low‐Concentration Sewage

Nickel-cobalt alloy nanosheet-decorated three-dimensional titanium dioxide nanobelts electrodeposited on titanium meshes for boosting selective nitrate electroreduction to ammonia

Electrochemical denitrification by a recyclable cobalt oxide cathode: Rapid recovery and selective catalysis

Electrocatalytic upcycling of nitrate and hydrogen sulfide via a nitrogen-doped carbon nanotubes encapsulated iron carbide electrode

Self-Activated Ni Cathode for Electrocatalytic Nitrate Reduction to Ammonia: From Fundamentals to Scale-Up for Treatment of Industrial Wastewater

Intentional corrosion-induced reconstruction of defective NiFe layered double hydroxide boosts electrocatalytic nitrate reduction to ammonia

Tuned targeted catalytic engineering enables high-selective electrochemical low-concentration nitrate-to-ammonia

The Improvement on Total Nitrogen Removal in Nitrate Reduction by Using a Prepared CuO-Co3O4/Ti Cathode

Electrodeposited copper–nickel nanoparticles as highly efficient electrocatalysts for nitrate reduction to ammonia

Nitrogen-based fertilizer recovery from nitrate wastewater: A novel electrocatalyst for ammonia synthesis and a new strategy for ammonia absorption

Enhanced electrocatalytic nitrate reduction to ammonia on cobalt oxide nanosheets via multiscale defect modulation

Deficient Tin oxide nanofibers with regulated valence for efficient nitrate reduction to ammonia

Molybdenum−Modified Titanium Dioxide Nanotube Arrays as an Efficient Electrode for the Electroreduction of Nitrate to Ammonia

Ambient ammonia production via selective electroreduction of nitrite by NiCu@TiO2 nanoribbon array

Electrochemically Reconstructed Copper-Polypyrrole Nanofiber Network for Remediating Nitrate-Containing Water at Neutral Ph

High-efficiency electrocatalytic nitrite reduction toward ammonia synthesis on CoP@TiO2 nanoribbon array

Coupling nitrate capture with ammonia production through bifunctional redox-electrodes