Abstract:With the continuous improvement in the precision of the laser powder bed fusion (LPBF) process, printing parts with highly complex geometries and fine details has been realized. Given the large design freedom provided by LPBF, various shell lattice structures have been designed and fabricated successfully. However, few works focus on predicting and minimizing the discrepancy between as-designed and as-printed structures, which is crucial for the geometric fidelity and resulting structural performance. This is partially due to the complexity of structures with thin-walled features and continuously changing overhang angles. This paper proposed a new method and workflow to predict the printing deviation and conduct the compensation for the thin-walled shell lattice structures fabricated by the high-precision LPBF (hp-LPBF). Numerical simulation, which was used to capture dynamic interaction behavior between the rake, powder particles, and samples, was performed using the discrete element method (DEM) to identify the key factors affecting the deviation prediction. Subsequently, a semi-analytical model was proposed to predict the as-printed thicknesses, in which the molten depth-induced staircase effect, compression-induced thickening effect, and scrape-induced thinning effect were considered. Both inclination angles and wall thickness were observed to have significant influences on the roughness and dimensional accuracy, of which three types of deviation were determined: (1) non-compensable deviation; (2) large but compensable deviation; (3) negligible deviation under 5%. Experimental results show that, by pre-compensation, the geometric deviation of thin walls with thicknesses of 135 μm and 185 μm was controlled to less than 10μm. The effectiveness and generality of this method for the thin-walled shell structures were further demonstrated by a case study of Schwarz Primitive triply periodic minimal surface lattice structure, which is characterized by micro-CT using the proposed workflow to predict and modify the lattice thickness and generate the compensated geometry for printing.

Predicting and Optimizing the Dimensions of Rod in Lattice Structures Fabricated by Laser Powder Bed Fusion

Investigation on Mechanical Properties’ Anisotropy of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

Investigation on Morphology and Mechanical Properties of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

Geometric deviation and compensation for thin-walled shell lattice structures fabricated by high precision laser powder bed fusion

A Comprehensive Model to Predict Friction Factors of Fluid Channels Fabricated Using Laser Powder Bed Fusion Additive Manufacturing

Formation mechanisms and control strategies of metallurgical defects and microstructures during laser powder bed fusion of AlSi10Mg lattice structures

Predictive modeling of lattice structure design for 316L stainless steel using machine learning in the L-PBF process

The Influence of Structural Design on the Dimensional Accuracy of CuCrZr Alloy Produced by Laser Powder Bed Fusion

Understanding grain evolution in laser powder bed fusion process through a real-time coupled Lattice Boltzmann model-Cellular Automaton simulation

Influence of scale effect on surface morphology in laser powder bed fusion technology

Prediction of mechanical properties of LPBF built part based on process monitoring and Gaussian process regression

Numerical investigation on effects of operating conditions and final dimension predictions in laser powder bed fusion of molybdenum

Modified inherent strain method coupled with shear strain and dynamic mechanical properties for predicting residual deformation of Inconel 738LC part fabricated by laser powder bed fusion

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Microstructure tailoring in laser powder bed fusion (L-PBF): Strategies, challenges, and future outlooks

Prediction of microstructure in laser powder bed fusion process

Design Optimization and Finite Element Model Validation of LPBF-Printed Lattice-Structured Beams

Mechanisms of processing map difference between laser powder bed fusion of Mg solid cubes and lattice structures

A new data-driven framework for prediction of molten pool evolution and lack of fusion defects in multi-track multi-layer laser powder bed fusion processes

Efficient Simulation of the Laser-Based Powder Bed Fusion Process Demonstrated on Open Lattice Materials Fabrication

Finite element modeling of melt pool dynamics in laser powder bed fusion of 316L stainless steel