Abstract:Since municipal solid waste incineration bottom ash (MSWIBA) contains some heavy metals that are harmful to the groundwater and soil, this study proposes an effective and new approach to deal with high-volume MSWIBA. Selecting 70% MSWIBA, 10% ordinary Portland cement (OPC), 10% fly ash/ground granulated blast furnace slag (FA/GGBFS), and 1% volume of polypropylene (PP) fiber as the raw materials, this project designed and manufactured cold-bonded fiber aggregates (CBFAs) and applied them into sustainable concrete. It was found that the water absorption of CBFAs was between 12 and 14%, the bulk density was between 900 and 1100 kg/m3, and the compressive strength of single particle was greater than 1.8 MPa. And it was found that the mechanical strength and bulk density of CBFAs were positively correlated, while the mechanical strength and water absorption were negatively correlated. The leaching behaviors of CBFAs on Cu, Pb, Cd, and Cr were successfully suppressed to less than 1% of that originally from MSWIBA, which can be in line with the Chinese standards. Additionally, it is also found that the green concrete with adding GGBFS-CBFAs has higher overall fluidity and better mechanical properties than the concrete with FA-CBFAs. The mechanical properties of concrete were the best under the replacement rate of 60% of CFBAs, and the strength of green concrete added with GGBFS-CBFAs reached 96% of that of ordinary concrete. In this study, the rapid chloride ion penetration test, mercury intrusion and electron microscope tests found that the bonding effect between the CBFAs and the green concrete matrix was better, and the pore structure in the transition zone of the surrounding interface was refined. The proportion of transition pores in the pore structure was up to 59%. This shows that the concrete added with CBFAs has better resistance to chloride ion diffusion, and has some improvement on the durability. This research suggests that CBFAs including high volume MSWIBA has the potential to be successfully applied as the alternative to natural aggregates in sustainable concrete, and this can also advance waste recycling, and solidify high volume heavy metals in infrastructures.

Full-Component Utilization of Cellulose Nanofibrils and Artificial Stone Waste for Cement Enhancement

Efficient Utilization of Waste Marine Clay for Fine Aggregate to Develop Sustainable and Cost-Effective Strain-Hardening Cement-Based Composites

Utilizing industrial byproducts for the manufacture of clay-cellulose nanocomposite cements with enhanced sustainability

Use of cellulose nanomaterials in cementitious composites reinforced with basalt/polymer pellets for repair of concrete

Experiment and molecular dynamics simulation of functionalized cellulose nanocrystals as reinforcement in cement composites

A Review on the Application of Nanocellulose in Cementitious Materials

Mechanical properties and microscopic mechanism of solid waste based binder solidified stone waste

Enhanced Compatibility of Secondary Waste Carbon Fibers through Surface Activation via Nanoceramic Coating in Fiber-Reinforced Cement Mortars

Upcycling of textile and footwear wastes for synergistical reinforcement of cement mortar

Back to basics: Nanomodulating calcium silicate hydrate gels to mitigate CO 2 footprint of concrete industry

Cellulose Nanocrystals from Office Paper Waste for Green Mortar: Process Optimization Modeling, Characterization, and Mechanical Properties

Study on the Alkali–Sulfur Co-Activation and Mechanical Properties of Low-Carbon Cementitious Composite Materials Based on Electrolytic Manganese Residue, Carbide Slag, and Granulated Blast-Furnace Slag

A multi-scale investigation on recycled ceramic and rubber composite cement-based materials: Acoustic emission, NMR, molecular dynamics simulation

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Synergistic Activation Mechanism and Long-Term Properties of a Solid Waste Cementitious Materials Based on Red Mud and Calcium Carbide Slag

Conjoint Reuse of Ceramic Polishing Waste and Calcium Carbide Slag As Mineral Admixtures: Hydration and Mechanical Properties

Hydrophobic kenaf straw core for biomass-based cement mortar with excellent mechanical properties

Interfacial nano-engineering by graphene oxide to enable better utilization of silica fume in cementitious composite

Enhancement of strength and ductility of cement-based composites by incorporating silica nanoparticle coated polyvinylalcohol fibers

Synergic Effect of Recycled Carbon Fibers and Microfibrillated Cellulose Gel for Enhancing the Mechanical Properties of Cement-Based Materials

Modification of water absorption and pore structure of high-volume fly ash cement pastes by incorporating nanosilica