Abstract:Despite the successful commercialization of Cu-SSZ-13 catalysts as efficient ammonia-selective catalytic reduction (NH3-SCR) catalysts in diesel vehicles for NOx elimination, their sensitivity toward phosphorus poisoning is one of the primary challenges to practical applications. In this study, an efficient method was used to regenerate a phosphorus-poisoned Cu-SSZ-13 catalyst by washing with hot water. The mechanism of deactivation and regeneration of the Cu-SSZ-13 catalyst was deeply investigated by a series of careful characterizations of fresh, poisoned, and regenerated catalysts. After regeneration, the recovery of the decreased accessibility and porosity, deactivated Brønsted acid sites, and Cu2+ ions resulted in the restoration of the decreased activity and hydrothermal stability of the poisoned Cu-SSZ-13. At a low phosphorus loading (0.2 mmol/gcatal, 0.54 wt %), the promotion effect of phosphorus on the SCR performance was observed after regeneration, which was attributed to the decrease in the content of CuO species and recovery of the acid sites and active Cu2+ ions after regeneration. Additionally, the combination of washing with hot water and hydrothermal aging results in good recovery of the SCR performance of the phosphorus-poisoned catalyst. This work focuses on the regeneration of a phosphorus-poisoned Cu-SSZ-13 catalyst, which provides an efficient method to prolong the lifespan of the Cu-SSZ-13 catalyst in practical applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c03752.P content data measured by ICP and XRF; percentage content of the different acid sites in the catalysts based on the NH3-TPD curves; catalytic activities and N2 selectivity of the fresh, poisoned, and regenerated catalysts, N2 adsorption–desorption isotherms; 31P MAS NMR spectra; XRD patterns; O 1s XPS spectra; and NH3-TPD and H2-TPR profiles (PDF)This article has not yet been cited by other publications.

Regeneration of Sulfur-Poisoned Ceo2 Catalysts Via in Situ Treatment from Nh3-Scr Atmosphere

Research Progress on Sulfur Deactivation and Regeneration over Cu-CHA Zeolite Catalyst

Regeneration of Sulfur-Poisoned CeO2 Catalyst for NH3-SCR of NOx

In situ regeneration of sulfated Cu/SAPO-34 catalyst for the selective catalytic reduction of NOx with NH3

Deactivation and Regeneration for the SO2-Poisoning of a Cu-SSZ-13 Catalyst in the NH3-SCR Reaction

Effects of regeneration conditions on sulfated CuSSZ-13 catalyst for NH 3 -SCR

A dual-functional way for regenerating NH3-SCR catalysts while enhancing their poisoning resistance

Chemical Poison and Regeneration of SCR Catalysts for NO X Removal from Stationary Sources

Protection Effect of Ammonia on CeNbTi NH3-SCR Catalyst from SO2 Poisoning

Deactivation Mechanism and Feasible Regeneration Approaches for the Used Commercial NH3-SCR Catalysts

A Facile and Controllable in Situ Sulfation Strategy for CuCeZr Catalyst for NH3-SCR

Review of Sulfur Promotion Effects on Metal Oxide Catalysts for NOx Emission Control

New Insight into SO2 Poisoning and Regeneration of CeO2-WO3/TiO2 and V2O5-WO3/TiO2 Catalysts for Low-Temperature NH3-SCR

Experimental Study on the Effects of the Exhaust Atmosphere on SO<sub>2</sub> Poisoning over the Cu-SSZ-13 SCR Catalyst

NOx reduction against sulfur poisoning by using Ce modified Cu-SAPO-34 catalysts

A novel regeneration method for deactivated commercial NH3-SCR catalysts with promoted low-temperature activities

Ce-Si Mixed Oxide: A High Sulfur Resistant Catalyst in the NH3-SCR Reaction Through the Mechanism-Enhanced Process.

Mechanism of Arsenic Poisoning on SCR Catalyst of CeW/Ti and Its Novel Efficient Regeneration Method with Hydrogen

Efficient Strategy to Regenerate Phosphorus-Poisoned Cu-SSZ-13 Catalysts for the NH 3 -SCR of NO x : The Deactivation and Promotion Mechanism of Phosphorus

Unraveling the Unexpected Offset Effects of Cd and SO2 Deactivation over CeO2-WO3/TiO2 Catalysts for NOx Reduction

Sulfur Poisoning and NH3 Regeneration of Pt/Al2 O3 : Oxidations of SO2 , NO and C3 H6 as Probe Reactions