Abstract:Thermally stable CeO2 cubes and nanospheres were synthesized and modified by sulfation treatment. Non-sulfated CeO2 cubes and nanospheres did not exhibit good catalytic performance for selective catalytic reduction of NOx with NH3 (NH3-SCR), but mainly contributed towards an undesired side reaction of NH3 oxidation above 350 degrees C. Based on the structural, morphological and physicochemical characterization, it was observed that CeO2 nanospheres comprising small crystallites could easily release active oxygen species, which resulted in strong NH3 oxidation. However, sulfation treatment greatly improved the catalytic performance of NH3-SCR on both CeO2 cubes and nanospheres. Sulfated CeO2 catalysts did not contribute to significant NH3 oxidation due to the inhibited reducibility of Ce4+ coordinated with the surface sulfates. The adsorbed ammonia could be activated on Bronsted acid sites generated by the formation of surface Ce-2(SO4)(3) species, while gaseous NOx could be activated on separate surface sites of Ce4+. The presence of separate reaction sites for NH3 and NOx is believed to be important for the improved catalytic performance of SCR reaction. Sulfated CeO2 cubes outperformed sulfated CeO2 nanospheres in the entire test temperature window (200-500 degrees C). The improved performance of sulfated CeO2 cubes appears to be related to surfaces with abundant Bronsted acid sites and relatively weak reducibility of Ce4+. These fundamental findings contribute to a better mechanistic understanding needed for designing efficient CeO2-based NOx reduction catalysts in the future.

NOx reduction against sulfur poisoning by using Ce modified Cu-SAPO-34 catalysts

Copper Doping Promotion on Ce/CAC-CNT Catalysts with High Sulfur Dioxide Tolerance for Low-Temperature NH 3 –SCR

Highly active NbOPO4 supported Cu-Ce catalyst for NH3-SCR reaction with superior sulfur resistance

Boosting the Low-Temperature Activity and Sulfur Tolerance of CeZr2Ox Catalysts by Antimony Addition for the Selective Catalytic Reduction of NO with Ammonia.

Direct incorporating small amount of Ce (III) in Cu-SAPO-18 catalysts for enhanced low-temperature NH<sub>3</sub>-SCR activity: Influence on Cu distribution and Si coordination

Boosting SO2-Tolerant Catalytic Reduction of NOx Via Selective Adsorption and Activation of Reactants over Ce4+–SO42– Pair Sites

CePO4 Supported Cr Catalyst with Superior Sulfur Tolerance for Selective Catalytic Oxidation of Ammonia

The influence of sodium on the catalytic properties, low-temperature hydrothermal stability, and sulfur resistance of Cu-SAPO-34 for NOx reduction by NH3-SCR

Zinc and phosphorus poisoning tolerance of Cu-SSZ-13 and Ce-Cu-SSZ-13 in the catalytic reduction of nitrogen oxides

Protection Effect of Ammonia on CeNbTi NH3-SCR Catalyst from SO2 Poisoning

Modification of Cu/ZSM-5 Catalyst with CeO2 for Selective Catalytic Reduction of NOx with Ammonia

A Facile and Controllable in Situ Sulfation Strategy for CuCeZr Catalyst for NH3-SCR

Enhancement of nitric oxide reduction via CeZrOx/Cu‐SSZ‐39 hybrid catalyst: Improving activity and hydrothermal stability

The Contradictory Impact of Sulfation on a CeOx/TiO2 NH3-SCR Catalyst: A Combined Experimental and DFT Study

One-pot synthesis of CNT-SAPO-34 composite supported copper and cerium catalysts with excellent surface resistance to SO2 and H2O in NH3-SCR

New Understanding of the Promotional Nature of SO2 on Ce-Based Oxide Catalysts for Selective Catalytic Reduction of NO X with NH3

Recent Advances in NO Reduction with NH3 and CO Over Cu-Ce Bimetallic and Derived Catalysts

Enhanced Performance of Iron-Cerium NO Reduction Catalysts by Sulfuric Acid Treatment: the Synergistic Effect of Surface Acidity and Redox Capacity

Ce enhanced low-temperature performance of Mn modified Cu-Beta zeolite catalyst for NH 3 -SCR

Migration, Reactivity, and Sulfur Tolerance of Copper Species in SAPO-34 Zeolite Toward NOx Reduction with Ammonia

Shape Dependence and Sulfate Promotion of CeO2 for Selective Catalytic Reduction of NO with NH3