Abstract:During deformation of aluminum (Al) alloys, there are three kinds of voids being formed by distinct mechanisms, i.e., matrix-cracking voids (MCVs), particle-cracking voids (PCVs), and interface-debonding voids (IDVs), due to mesoscale heterogeneous deformation. The three kinds of void nucleation have different effects on the subsequent void growth, void coalescence, and ductile fracture of Al alloys. To determine the complex nucleation behavior of the three kinds of voids under mesoscale heterogeneous deformation, a microstructure- and damage-nucleation-based crystal plasticity finite element (MDNCPFE) model considering different nucleation mechanisms was established. To realize the MDN-CPFE modeling, the deformation and void nucleation of the matrix, particle, and their interface in Al alloys were described by a non-local dislocation density CP constitutive model and a local stored energy density criterion, an elastic constitutive model and a maximum principal stress criterion, and a cohesive zone model and fracture energy criterion, respectively. The developed MDN-CPFE model was validated by the nucleation locations and quantitative variations of the three kinds of voids in an in-situ tensile test. Using the developed model, the nucleation characteristics of the three kinds of voids during the small deformation of Al alloys were analyzed. It is found that PCVs are likely to nucleate within particles that are located at the deformation bands and with greater shape irregularity; IDVs are prone to nucleate at the interfaces around smaller particles in the deformation bands; MCVs tend to nucleate within grains with a higher Schmid factor and aspect ratio. The void area fractions (VAFs) of the three kinds of voids all evolve with an incubation stage and then followed by an exponentially increasing stage during deformation. The duration of the incubation stage for the three kinds of voids, designated by the nucleation strain, presents the following sequence: PCV < IDV < MCV; while, their VAFs and quantities present the opposite sequence. Additionally, the effects of the particle volume fraction and grain size on the nucleation strain, total VAF, and proportion of VAFs of the three kinds of voids were unraveled.

Coupling of Spallation and Microjetting in Aluminum at the Atomic Scale

Atomic Insights into Shock-Induced Spallation of Single-Crystal Aluminum Through Molecular Dynamics Modeling

Spallation fracture dependence on shock intensity and loading duration in single-crystal aluminum

Spallation Characteristics of Single Crystal Aluminum with Copper Nanoparticles Based on Atomistic Simulations

Atomic scale studies of spall behavior in nanocrystalline Cu

Understanding the spall behaviors of single crystalline aluminum under double decaying shock loadings: Atomistic simulations and theoretical models

Molecular Dynamics Study on Spallation Fracture in Single Crystal and Nanocrystalline Tin

Atomic-scale Modeling of the Void Nucleation, Growth, and Coalescence in Al at High Strain Rates

Molecular Dynamics Investigation of Loading Orientation Effect on Dynamic Behaviors of Void in Aluminum

Sudden change of spall strength induced by shock defects based on atomistic simulation of single crystal aluminum

Coupling of dynamic ductile damage and melting in shock-induced micro-spalling: Modeling and applications

Cooperative competition between melt-phase and void during micro-spallation and recompression

Nanovoid collapse mechanism in defect-free aluminum under isothermal and adiabatic conditions

Microstructure- and Damage-Nucleation-based Crystal Plasticity Finite Element Modeling for the Nucleation of Multi-Type Voids During Plastic Deformation of Al Alloys

Synergy of Spall Strength and Toughness in Nanograined Metals

An Atomic View on the Evolution of Spall Damage in Solid–liquid Mixed Aluminum at High Strain Rates Through Stretching Simulations

Shock responses of nanoporous aluminum by molecular dynamics simulations

How Does Spallation Microdamage Nucleate in Bulk Amorphous Alloys under Shock Loading?

Enhanced spall strength of single crystal aluminum by temperature rise mitigation and structural phase transition under shock pulse

Influence of the twin boundary and Cr segregation on the spalling of Ni-base alloys by large-scale molecular dynamic simulations

New Insights into the Microstructures and Mechanical Responses of Large-Scale Colliding Aluminum Nanospheres