Abstract:During deformation of aluminum (Al) alloys, there are three kinds of voids being formed by distinct mechanisms, i.e., matrix-cracking voids (MCVs), particle-cracking voids (PCVs), and interface-debonding voids (IDVs), due to mesoscale heterogeneous deformation. The three kinds of void nucleation have different effects on the subsequent void growth, void coalescence, and ductile fracture of Al alloys. To determine the complex nucleation behavior of the three kinds of voids under mesoscale heterogeneous deformation, a microstructure- and damage-nucleation-based crystal plasticity finite element (MDNCPFE) model considering different nucleation mechanisms was established. To realize the MDN-CPFE modeling, the deformation and void nucleation of the matrix, particle, and their interface in Al alloys were described by a non-local dislocation density CP constitutive model and a local stored energy density criterion, an elastic constitutive model and a maximum principal stress criterion, and a cohesive zone model and fracture energy criterion, respectively. The developed MDN-CPFE model was validated by the nucleation locations and quantitative variations of the three kinds of voids in an in-situ tensile test. Using the developed model, the nucleation characteristics of the three kinds of voids during the small deformation of Al alloys were analyzed. It is found that PCVs are likely to nucleate within particles that are located at the deformation bands and with greater shape irregularity; IDVs are prone to nucleate at the interfaces around smaller particles in the deformation bands; MCVs tend to nucleate within grains with a higher Schmid factor and aspect ratio. The void area fractions (VAFs) of the three kinds of voids all evolve with an incubation stage and then followed by an exponentially increasing stage during deformation. The duration of the incubation stage for the three kinds of voids, designated by the nucleation strain, presents the following sequence: PCV < IDV < MCV; while, their VAFs and quantities present the opposite sequence. Additionally, the effects of the particle volume fraction and grain size on the nucleation strain, total VAF, and proportion of VAFs of the three kinds of voids were unraveled.

Atomic-scale Modeling of the Void Nucleation, Growth, and Coalescence in Al at High Strain Rates

Microstructure- and Damage-Nucleation-based Crystal Plasticity Finite Element Modeling for the Nucleation of Multi-Type Voids During Plastic Deformation of Al Alloys

Atomic Simulation of Void Location Effect on the Void Growth in Nickel-Based Single Crystal

Molecular Dynamics Investigation of Loading Orientation Effect on Dynamic Behaviors of Void in Aluminum

Influence of Defects and Crystallographic Orientation on Mechanical Behavior of Nanocrystalline Aluminium

Atomistic Simulation Analysis of the Effects of Void Interaction on Void Growth and Coalescence in a Metallic System

An Atomic View on the Evolution of Spall Damage in Solid–liquid Mixed Aluminum at High Strain Rates Through Stretching Simulations

Void Nucleation in Alloys with Lamella Particles under Biaxial Loadings

Molecular dynamics study of void effect on nanoimprint of single crystal aluminum

Experimental and Finite Element Study of Void Growth in Nickel-Base Single Crystal Superalloys

Atomistic Insights into Dislocation-Based Mechanisms of Void Growth and Coalescence

Molecular Dynamics Study on Interaction Between Voids for Pure Aluminum

Numerical simulation on creep damage and crack initiation behaviour of nickel-based single crystal superalloys containing a casting void

Void Configuration-Induced Change in Microstructure and Deformation Mechanisms of Nano-Porous Materials

Coupling of Spallation and Microjetting in Aluminum at the Atomic Scale

Finite Element Analysis of Void Growth Behavior in Nickel-Based Single Crystal Superalloys

Molecular Dynamic Simulation of Nanocrystal Formation and Tensile Deformation of TiAl Alloy

Crystal Plasticity-Based Micromechanical Finite Element Modelling of Ductile Void Growth for an Aluminium Alloy under Multiaxial Loading Conditions

Molecular dynamics study on dynamic response of void-included aluminum under different loading patterns

Molecular Dynamics Study of Uniaxial Deformation in Perfect and Defective Aluminum

Nanovoid Growth in BCCα-Fe: Influences of Initial Void Geometry