Abstract:In recent years, rapid solidification techniques have garnered considerable attention due to their capacity to yield metals with unique microstructures and properties unattainable through conventional processing methods. These techniques involve swiftly cooling the metal, resulting in a fine-grained microstructure, unlike the coarse-grained microstructures typically obtained through traditional methods. This paper offers an overview of several rapid solidification techniques, such as melt spinning, spray forming, and gas atomization. These methods entail rapidly cooling molten metal by either quenching it onto a swiftly rotating wheel or spraying it onto a substrate. The cooling rates achieved, typically ranging from 10 4 to 10 7 K/s, far exceed those of conventional casting methods. The distinctive microstructure resulting from rapid solidification techniques presents numerous advantages over conventional methods. These include enhanced homogeneity, increased strength, improved ductility, heightened thermal stability, and augmented corrosion resistance. Consequently, rapid solidification techniques hold significant promise for applications across aerospace, automotive, and medical industries. This review also underscores recent advancements in rapid solidification techniques and their potential applications. These encompass the production of high-strength, wear-resistant materials for cutting tools, the development of lightweight alloys for aerospace applications, and the manufacture of biocompatible alloys for medical implants. In summation, this review offers a comprehensive examination of the latest progress in rapid solidification techniques for metal processing and their diverse applications across various industries.

Sub-rapid solidification microstructure characteristics and control mechanisms of twin-roll cast aluminum alloys: A review

Prediction on the solidification behavior of AA6005 aluminum alloys produced by inclined twin-roll casting: A finite element analysis

Synergistic effects of the TiC nanoparticles and cold rolling on the microstructure and mechanical properties of Al–Cu strips fabricated by twin-roll casting

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Microstructure of Aluminum Twin-Roll Casting Based on Cellular Automation

Improving element uniformity and mechanical properties of Al–Mg–Si alloy fabricated by twin roll casting with superheat melt treatment

Twin-roll casting defects in light metals

Strength and ductility enhancement of twin-roll cast Al-Zn-Mg-Cu alloys with high solidification intervals through a synergistic segregation-controlling strategy

Effectively mitigated macro-segregation and improved tensile properties of twin-roll casting Al-Cu strips via the addition of TiC nanoparticles

The Effects of Microstructure Refinement and Coincidence Site Lattice Boundaries on the Plasticity of FeCrAlY Alloys

New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications

Control of Upstream Austenite Grain Coarsening during the Thin-Slab Cast Direct-Rolling (TSCDR) Process

Development of High Performance of Al Alloys via Cryo‐Forming: A Review

High solid-solution strengthening mechanism of a novel aluminum-lithium alloy fabricated by electromagnetic near-net shape technology

Deep Drawability of Al-Mg Alloys Produced by Twin Roll Continuous Casting Method: Investigation of Microstructure and Mechanical Properties

Microstructure evolution and precipitation behaviour of the Cu-Ni-Si-Cr alloy based on twin-roll strip casting

Review on Role of Intermetallic and Ceramic Particles in Recrystallization Driving Force and Microstructure of Wrought Al Alloys

Fe-bearing phase formation, microstructure evolution, and mechanical properties of Al-Mg-Si-Fe alloy fabricated by the twin-roll casting process

Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Rapid Solidification Techniques for Metal Processing: Microstructure and Properties

Role of alloying and heat treatment on microstructure and mechanical properties of cast Al-Li alloys: A review