Abstract:As an important means to enhance oil recovery, ternary composite flooding (ASP flooding for short) technology has achieved remarkable results in Daqing Oilfield. Alkalis, surfactants and polymers are mixed in specific proportions and injected into the reservoir to give full play to the synergistic effect of each component, which can effectively enhance the fluidity of crude oil and greatly improve the oil recovery. At present, the technology for further improving oil recovery after ternary composite flooding is not mature and belongs to the stage of technical exploration. The presence of alkaline substances significantly alters the reservoir's physical properties and causes considerable corrosion to the equipment used in its development. This is detrimental to both the environment and production. Therefore, it is necessary to develop green displacement control agents. In the reservoir environment post-ASP flooding, 2-(methylamino)ethyl methacrylate and glycidyl methacrylate were chosen as monomers to synthesize a polymer responsive to alkali, and then grafted with cellulose nanocrystals to form microspheres of alkali-resistant swelling hydrogel. Cellulose nanocrystals (CNCs) modified with functional groups and other materials were utilized to fabricate hydrogel microspheres. The product's structure was characterized and validated using Fourier transform infrared spectroscopy and X-ray diffraction. The infrared spectrum revealed characteristic absorption peaks of CNCs at 1165 cm-1, 1577 cm-1, 1746 cm-1, and 3342 cm-1. The diffraction spectrum corroborated the findings of the infrared analysis, indicating that the functional modification occurred on the CNC surface. After evaluating the swelling and erosion resistance of the hydrogel microspheres under various alkaline conditions, the optimal particle size for compatibility with the target reservoir was determined to be 6 μm. The potential of cellulose-based gel microspheres to enhance oil recovery was assessed through the evaluation of Zeta potential and laboratory physical simulations of oil displacement. The study revealed that the absolute value of the Zeta potential for gel microspheres exceeds 30 in an alkaline environment with pH values ranging from 7 to 14, exhibiting a phenomenon where stronger alkalinity correlates with a greater absolute value of Zeta potential. The dispersion stability spans from good to excellent. The laboratory oil displacement simulation experiment was conducted using a cellulose-based gel microsphere system following weak alkali ASP flooding within the pH value range from 7 to 10. The experimental interventions yielded recovery rates of 2.98%, 3.20%, 3.31%, and 3.38%, respectively. The study indicates that cellulose-based gel microspheres exhibit good adaptability in alkaline reservoirs. This research offers a theoretical foundation and experimental approaches to enhance oil recovery techniques post-ASP flooding.

Carboxymethyl Cellulose-based Preformed Particle Gels for Water Management in Oil and Gas Reservoirs

Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs

Efficiency of an automatic dehydrated carrier for the vitrification of human embryos derived from three pronuclei fertilized zygotes.

Preparation and Characterization of Preformed Polyelectrolyte and Polyampholyte Gel Particles for Plugging of High-Permeability Porous Media

Experimental Investigation of a Novel Nanocomposite Particle Gel for Water Shutoff Treatment in Mature Oilfields

Swelling Behavior of Carboxymethylchitosan-Based Nanocomposite Hydrogels in Response to Different Stimuli (Salinity, pH, and Temperature) and the Gels’ Microfluidic Capability for Water Shut-Off Applications

Experimental study on the plugging and profile control of preformed particle gels in high temperature and salinity reservoir

Effect of Network Parameters of Preformed Particle Gel on Structural Strength for Water Management

Preparation and evaluation of soft preformed particle gels for conformance control in carbonate reservoir

Progress of Research into Preformed Particle Gels for Profile Control and Water Shutoff Techniques

Rheological properties and swelling behavior of nanocomposite preformed particle gels based on starch-graft-polyacrylamide loaded with nanosilica

Preparation and Characterization of Responsive Cellulose-Based Gel Microspheres for Enhanced Oil Recovery

Nanocellulose/scleroglucan-enhanced robust, heat-resistant composite hydrogels for oilfield water plugging

Thermo‐ and CO2‐triggered Swelling Polymer Microgels for Reducing Water‐cut During CO2 Flooding

Preparation Method and Performance Evaluation of a Gel Based on AM/AMPS Copolymer

Lignocellulosic hydrogel for profile control and water plugging in high salt reservoirs

Study on Water-Soluble Phenolic Resin Gels for High-Temperature and High-Salinity Oil Reservoir

Novel preformed gel particles with controllable density and its implications for EOR in fractured-vuggy carbonated reservoirs

Development of degradable pre-formed particle gel (DPPG) as temporary plugging agent for petroleum drilling and production

A novel polymer gel with high-temperature and high-salinity resistance for conformance control in carbonate reservoirs

Influence of grain direction and pre-heating on linear wood welding