Abstract:As an important means to enhance oil recovery, ternary composite flooding (ASP flooding for short) technology has achieved remarkable results in Daqing Oilfield. Alkalis, surfactants and polymers are mixed in specific proportions and injected into the reservoir to give full play to the synergistic effect of each component, which can effectively enhance the fluidity of crude oil and greatly improve the oil recovery. At present, the technology for further improving oil recovery after ternary composite flooding is not mature and belongs to the stage of technical exploration. The presence of alkaline substances significantly alters the reservoir's physical properties and causes considerable corrosion to the equipment used in its development. This is detrimental to both the environment and production. Therefore, it is necessary to develop green displacement control agents. In the reservoir environment post-ASP flooding, 2-(methylamino)ethyl methacrylate and glycidyl methacrylate were chosen as monomers to synthesize a polymer responsive to alkali, and then grafted with cellulose nanocrystals to form microspheres of alkali-resistant swelling hydrogel. Cellulose nanocrystals (CNCs) modified with functional groups and other materials were utilized to fabricate hydrogel microspheres. The product's structure was characterized and validated using Fourier transform infrared spectroscopy and X-ray diffraction. The infrared spectrum revealed characteristic absorption peaks of CNCs at 1165 cm-1, 1577 cm-1, 1746 cm-1, and 3342 cm-1. The diffraction spectrum corroborated the findings of the infrared analysis, indicating that the functional modification occurred on the CNC surface. After evaluating the swelling and erosion resistance of the hydrogel microspheres under various alkaline conditions, the optimal particle size for compatibility with the target reservoir was determined to be 6 μm. The potential of cellulose-based gel microspheres to enhance oil recovery was assessed through the evaluation of Zeta potential and laboratory physical simulations of oil displacement. The study revealed that the absolute value of the Zeta potential for gel microspheres exceeds 30 in an alkaline environment with pH values ranging from 7 to 14, exhibiting a phenomenon where stronger alkalinity correlates with a greater absolute value of Zeta potential. The dispersion stability spans from good to excellent. The laboratory oil displacement simulation experiment was conducted using a cellulose-based gel microsphere system following weak alkali ASP flooding within the pH value range from 7 to 10. The experimental interventions yielded recovery rates of 2.98%, 3.20%, 3.31%, and 3.38%, respectively. The study indicates that cellulose-based gel microspheres exhibit good adaptability in alkaline reservoirs. This research offers a theoretical foundation and experimental approaches to enhance oil recovery techniques post-ASP flooding.

Experimental study on the plugging and profile control of preformed particle gels in high temperature and salinity reservoir

Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs

Experimental Investigation of a Novel Nanocomposite Particle Gel for Water Shutoff Treatment in Mature Oilfields

Lignocellulosic hydrogel for profile control and water plugging in high salt reservoirs

Towards in-depth profile control using dispersed particle gels (DPGs)

Novel preformed gel particles with controllable density and its implications for EOR in fractured-vuggy carbonated reservoirs

A novel profile modification HPF-Co gel satisfied with fractured low permeability reservoirs in high temperature and high salinity

Experimental Study on Enhanced Oil Recovery of the Heterogeneous System after Polymer Flooding

Application of a Salt-Resistant In Situ Cross-Linked Terpolymer Gel for the Daqing Oilfield

Enhanced Oil Recovery Using Micron-Size Polyacrylamide Elastic Microspheres: Underlying Mechanisms and Displacement Experiments

Experimental Study of Oilfield Water Plugging with Organic Chromium Gel

Experimental Performance Evaluation and Optimization of a Weak Gel Deep-Profile Control System for Sandstone Reservoirs

Nanoparticle stabilized emulsion with surface solidification for profile control in porous media

A novel polymer gel with high-temperature and high-salinity resistance for conformance control in carbonate reservoirs

Preparation and Characterization of Responsive Cellulose-Based Gel Microspheres for Enhanced Oil Recovery

Synthesis and Performance Evaluation of a Novel Nanoparticle Coupling Expanded Granule Plugging Agent

Study on increasing polymer gel strength with Janus nanoparticles and its feasibility in profile control and water plugging

Water Management and Oil Recovery Improvement Performance of High-Strength Preformed Particle Gels in Fractured Conglomerate Reservoirs

Preparation and Characterization of Preformed Polyelectrolyte and Polyampholyte Gel Particles for Plugging of High-Permeability Porous Media

Progress of Research into Preformed Particle Gels for Profile Control and Water Shutoff Techniques

Experimental Investigation on a Novel Particle Polymer for Enhanced Oil Recovery in High Temperature and High Salinity Reservoirs