Abstract:Summary To address the challenges in fracture conformance control using polymer particles in ultraharsh reservoirs, we developed novel self-granulating thermoplastic elastic particles (SGTEPs). The innovation was driven by the complexity of the traditional polymer particle preparation process and the difficulties in balancing injectivity and conformance control performance. Polyvinyl alcohol (PVA) served as the particle skeleton, and millimeter-scale SGTEPs were prepared in situ by incorporating a hydrophobic modifier (HM) and a cross-linking agent (glutaraldehyde, GA) into an aqueous phase. The morphology, mechanical properties, and high-salinity thermal stability of SGTEPs were investigated using scanning electron microscopy (SEM), texture profile analysis (TPA), and thermal aging tests at 130°C. Particle size adjustability was demonstrated through the modulation of HM content and stirring speed. TPA highlighted SGTEPs’ superior elasticity and resilience. SGTEPs underwent thermal plasticization in ultrahigh-salinity brines (22.0 × 104 mg/L, Ca2+ + Mg2+ = 1.2 × 104 mg/L) and crude oil at temperatures up to 130°C, retaining exceptional mechanical properties even after 60 days of aging. Open fracture models were designed to investigate the effect of particle size, injection rate, and particle concentration on SGTEPs’ migration performance. Coreflooding experiments indicated effective migration and conformance control performance of SGTEPs, with appropriate matching coefficients of 1.45 and 1.50. The particles exhibited an “aggregation → accumulation → deformation migration” effect, with particle concentration linearly affecting differential pressures. After high-temperature aging, SGTEPs could efficiently plug the open fracture, achieving breakthrough pressures up to 1860 kPa. Field application results showed significant improvements in oil production and water-cut reduction. Specifically, the daily oil production of Well TK466 increased from 4.6 tons to 15.5 tons, with an incremental oil production of 252.5 tons per well and a reduction in average water cut from 90% to 82.7%. The newly developed SGTEPs offer a fresh perspective on material design for enhancing conformance control in ultraharsh condition reservoirs with large fractures and void spaces. The novel particles demonstrated excellent thermal stability, elasticity, and migration and plugging performance, making them a promising solution for improved oil recovery in challenging reservoir conditions.

Preparation and evaluation of soft preformed particle gels for conformance control in carbonate reservoir

Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs

Effect of Network Parameters of Preformed Particle Gel on Structural Strength for Water Management

Progress of Research into Preformed Particle Gels for Profile Control and Water Shutoff Techniques

Hydrolysable Preformed Gels for Conformance Control in Oilwells: Properties and Degradation

Synthesis and optimization of bentonite enforced poly (acrylamide/co- sodium dodecylbenzensulfonate) preformed particle gels for conformance control in high salinity reservoirs

Host-Guest recognition strengthened supramolecular preformed particle gel for conformance control in low-permeability fractured reservoirs

Novel preformed gel particles with controllable density and its implications for EOR in fractured-vuggy carbonated reservoirs

Study on preparation and plugging effect of sawdust gel particle in fractured reservoir

Rheological properties and swelling behavior of nanocomposite preformed particle gels based on starch-graft-polyacrylamide loaded with nanosilica

Water Management and Oil Recovery Improvement Performance of High-Strength Preformed Particle Gels in Fractured Conglomerate Reservoirs

Preparation and Characterization of Preformed Polyelectrolyte and Polyampholyte Gel Particles for Plugging of High-Permeability Porous Media

Experimental Investigation of a Novel Nanocomposite Particle Gel for Water Shutoff Treatment in Mature Oilfields

Gelling Behavior of PAM/Phenolic Crosslinked Gel and Its Profile Control in a Low-Temperature and High-Salinity Reservoir

A novel polymer gel with high-temperature and high-salinity resistance for conformance control in carbonate reservoirs

Self-Granulating Thermoplastic Elastic Particles for Fracture Conformance Control in Ultraharsh Reservoirs: Laboratory Investigation and Field Application

A Novel Branched Polymer Gel System with Delayed Gelation Property for Conformance Control

Experimental study on the plugging and profile control of preformed particle gels in high temperature and salinity reservoir

Development and Performance Evaluation of a New Conformance Control Agent Gel

Preparation and performance of pH-temperature responsive low-damage gel temporary plugging agent

Novel Gel with Controllable Strength for In-Depth Conformance Control: Bulk Gelation Performance and Propagation Properties in Porous Media