Abstract:State of Charge (SoC) is essential in a smart Battery Management System (BMS). Traditional SoC estimation methods consider the lithium battery cell as an isothermal body simplistically, which is not accurate. Due to the heat conduction and convection, the temperature distribution along the radius is nonuniform, which means the battery model parameters subject to temperature are not identical radially. This paper proposed a modified electrochemical-distributed thermal coupled model (MEDTM) for improving the accuracy of SoC estimation. The distributed thermal model is employed to design a robust H-infinity temperature observer for the estimation of the radial temperature distribution of battery cell, where a radial discretized method is used for the realization of the observer design. Based on the observed temperature, a SoC observer is developed with the backstepping method. Finally, experiments and simulation are implemented. The two constant discharging experiments indicate that MEDTM is more accurate than the single particle model with surface temperature (SPMST), and it can generate reliable temperature prediction. A comparative simulation and a constant discharging experiment verify the H-infinity temperature observer can obtain a more accurate estimation of the battery cell's temperature than the luenberger observer, and the H-infinity temperature observer has an estimation error of 0.3 K below. Then, through a constant discharging experiment and a simulation with UDDS current, the proposed SoC observer is verified to accurately estimate the SoC by comparing with the true SoC, where the estimated error of SoC under the two cases is below 1.5% and below 0.4%, respectively. Therefore, the proposed SoC observer also has good performance.

Data-Driven Real-Time Prediction of Pouch Cell Temperature Field Under Minimal Sensing

Electrochemical-distributed Thermal Coupled Model-Based State of Charge Estimation for Cylindrical Lithium-Ion Batteries

Optimal-Sensing-Based Recursive Estimation for Temperature Distribution of Pouch-Type Batteries

Identification of Temperature-Dependent Gas Production Rates in Pouch Lithium-Ion Cells

Temperature field spatiotemporal modeling of lithium-ion battery pack configured sparse temperature sensors

Distributed Thermal Monitoring for Large-Format Li-ion Battery under Limited Sensing

Space-Decomposition-Based Spectral Modeling for Distributed Battery Thermal Dynamics

A Novel Quick Temperature Prediction Algorithm for Battery Thermal Management Systems Based on a Flat Heat Pipe

Chebyshev–Galerkin-Based Thermal Fault Detection and Localization for Pouch-Type Li-Ion Battery

Self-Adapting Power Density Sampling for On-Chip Thermal Prediction With Transistor-Level Granularity

Fast multilayer temperature distribution estimation for lithium-ion battery pack

An Online SOC-SOTD Joint Estimation Algorithm for Pouch Li-Ion Batteries Based on Spatio-Temporal Coupling Correction Method

A Spatiotemporal Prediction Approach for a 3D Thermal Field from Sensor Networks

A Deep Transfer Operator Learning Method for Temperature Field Reconstruction in a Lithium-Ion Battery Pack

Accurate battery temperature prediction using self-training neural networks within embedded system

A Hybrid Mechanism-Based and Data-Driven Model for Efficient Indoor Temperature Distribution Prediction with Transfer Learning

Physics-informed Machine Learning for Battery Pack Thermal Management

Evolutionary Sensor Placement for Spatiotemporal Modeling of Battery Thermal Process

Fast Modeling of Battery Thermal Dynamics Based on Spatio-Temporal Adaptation

Frequency reconstruction oriented EMD-LSTM-AM based surface temperature prediction for lithium-ion battery

Thermal Full-Field Prediction of an Air-Cooled Data Center Using a Novel Multi-Scale Approach Based on POD and CFD Coupling