New Design Recommendations for QN1803 High-Strength Stainless-Steel Plate Girders with Web Openings in Shear

Boshan Chen,Yuanqing Wang,Youtian Wang,Lisheng Luo,Beibei Li,James B. P. Lim,Yecheng Dai

DOI: https://doi.org/10.1016/j.jcsr.2024.108907

IF: 4.349

2024-01-01

Journal of Constructional Steel Research

Abstract:This study reports results of a comprehensive numerical analysis to develop new design recommendations for determining the shear resistance of QN1803 high-strength stainless-steel plate girders with web openings. A numerical model was developed and validated against experimental results reported by the authors. Following this, a detailed parametric study including 540 numerical results are presented; variables considered include the local geometrical imperfections, web slenderness, web aspect ratio, hole ratio and end cases. The parametric study results suggested that for specimens with a hole ratio of 0.7, the presence of web openings could result in a reduction of 65% in shear resistance. Also, the shear resistance of those beams containing fixed-end post increased by 9%, compared to those specimens containing free-end post. The test and numerical results were used to assess the existing design recommendations in Eurocode (EN 1993-1-4 + A1) (2015) and American National Standard (ANSI/AISC 370-21) (2021). A comparison was conducted, indicating that the design strengths were un-conservative by 7% and 4% on average for EN 1993-1-4 + A1 (2015) and ANSI/AISC 370-21 (2021), respectively. New design recommendations in the form of strength reduction factors were proposed by modifying the current design rules, and a reliability analysis was then conducted, demonstrating that the modified equations can closely predict the shear resistance of such members with web openings (only 3% difference).