Shear Performance and Design Rules for Welded Stainless Steel I-shaped Members with Web Openings

Boshan Chen,Yuanqing Wang,Dongdong Xu,Huanxin Yuan,Libo Yan

DOI: https://doi.org/10.1016/j.tws.2023.110803

IF: 5.881

2023-01-01

Thin-Walled Structures

Abstract:The use of stainless steel I-shaped members as primary load-bearing members has become increasingly popular, particularly in acidic environments, owing to their corrosion resistance and other advantages. Openings on the web are often introduced for ease of installation. The presence of web openings can reduce the shear resistance and produce high stresses around the openings, limiting their application. However, no previous study has investigated the shear resistance and design rules of such welded stainless steel I-shaped members with web openings. This work presents a detailed numerical analysis to examine the shear performance of perforated stainless steel members. Finite element (FE) models considering material nonlinearity and initial geometric imperfections were developed and verified using corresponding test data presented by the authors and many researchers. A parametric study including 434 FE models was undertaken to analyse the influence of web openings on the shear resistance of such members. The results suggested that for members with a hole diameter–web height ratio of 0.7, web openings can reduce the shear resistance by 61.4% on average, when compared to unperforated members. The generated numerical results were used to evaluate the current design recommendations given in the Eurocode (EN 1993-1-4+A1) (2015), American standard (ANSI/AISC 370-21) (2021), and those design rules proposed by Chen et al. (2018), although they were designed only for unperforated members. The comparisons demonstrated that the current design guidelines provided non-conservative predictions for calculating the shear resistance of perforated members. New design formulas were proposed using the strength reduction factor. A reliability analysis was undertaken, which indicated that the new design formulas were reliable for predicting the shear resistance of such members.