Abstract:To address the issue of centrifugal force affecting the vertical load during the stability and trajectory planning of autonomous vehicles during high-speed cornering and obstacle avoidance, a model predictive control of trajectory planning and tracking is proposed that considers the roll factor using only a two-degrees-of-freedom vehicle dynamics model. Firstly, a trajectory planning controller is designed. As a predictive model, a dual-track two-degrees-of-freedom vehicle dynamics model is established. This model describes the relationship between tire lateral forces and vertical loads using a quadratic nonlinear tire model. To reflect the actual dynamic state of the vehicle, the controller incorporates a nonlinear constraint that considers vertical load variations. The nonlinear optimization problem is transformed into a simplified quadratic programming problem by using the Jacobian matrix method to linearize the constraints. By fitting a fourth-degree polynomial curve to the discrete points calculated by the replanning algorithm, an optimal collision-free trajectory is obtained. Secondly, an MPC trajectory tracking controller is designed to control the vehicle in real time along the optimal trajectory from the planning, incorporating control quantity constraints, control increment constraints, and lateral angle constraints to maintain the vehicle's motion state. We transform the trajectory tracking control problem into a quadratic programming problem, solving for the optimal control sequence for the autonomous vehicle to track the trajectory, achieving an optimized solution and rolling time domain control. Finally, the effectiveness of the vehicle's obstacle avoidance planning and tracking under high-speed double-lane-change maneuver conditions is validated using the Simulink simulation platform. The results indicate that the designed planning and tracking controllers effectively improve the obstacle avoidance planning and tracking control for high-speed autonomous vehicles.

Design of Active Posture Controller for Trailing-Arm Vehicle: Improving Path-Following and Handling Stability

NMPC-based Path Tracking Control Strategy for 4WID Autonomous Vehicle Considering Handling Stability Under Extreme Conditions

Robust path following control of 4WID autonomous vehicle with driving condition adaptive mechanism

Attitude Tracking Control of All-Terrain Vehicle with Tandem Active–Passive Suspension

Research on Intelligent Vehicle Trajectory Tracking Control Based on Improved Adaptive MPC

Path-Tracking Considering Yaw Stability with Passivity-Based Control for Autonomous Vehicles

Robust integrated control of autonomous vehicles path following with response performance improvement considering lateral stability

Interacting multiple model-based yaw stability control for distributed drive electric vehicle via adaptive model predictive control algorithm

Stability coordinated control strategy of autonomous unmanned 4WID-4WIS vehicle based on APD-LQR and AFSMC

Model Predictive Control for Trajectory Planning Considering Constraints on Vertical Load Variation

A Hierarchical Adaptive Control Framework of Path Tracking and Roll Stability for Intelligent Heavy Vehicle with MPC

NMPC-based controller for vehicle longitudinal and lateral stability enhancement under extreme driving conditions

Modular Integrated Longitudinal, Lateral, and Vertical Vehicle Stability Control for Distributed Electric Vehicles

Path Tracking of Autonomous Vehicle Based on Adaptive Preview Trajectory Planning with the Consideration of Vehicle Stability

New Integrated Vehicle Stability Control of Active Front Steering and Electronic Stability Control Considering Tire Force Reserve Capability

Adaptive Model Predictive Control for Intelligent Vehicle Trajectory Tracking Considering Road Curvature

Hierarchical Coupling Motion Control of Distributed Vehicle Considering Vehicle Posture

Distributed Drive Electric Vehicle Handling Stability Coordination Control Framework Based on Adaptive Model Predictive Control

Adaptive Model Predictive Control of Yaw Rate and Lateral Acceleration for an Active Steering Vehicle Based on Tire Stiffness Estimation

Coordinated longitudinal and lateral vehicle stability control based on the combined-slip tire model in the MPC framework

Coordinated Longitudinal and Lateral Stability Improvement for Electric Vehicles Based on a Real-Time NMPC Strategy