Abstract:Intelligent vehicle trajectory tracking exhibits problems such as low adaptability, low tracking accuracy, and poor robustness in complex driving environments with uncertain road conditions. Therefore, an improved method of adaptive model predictive control (AMPC) for trajectory tracking was designed in this study to increase the corresponding tracking accuracy and driving stability of intelligent vehicles under uncertain and complex working conditions. First, based on the unscented Kalman filter, longitudinal speed, yaw speed, and lateral acceleration were considered as the observed variables of the measurement equation to estimate the lateral force of the front and rear tires accurately in real time. Subsequently, an adaptive correction estimation strategy for tire cornering stiffness was designed, an AMPC method was established, and a dynamic prediction time-domain adaptive model was constructed for optimization according to vehicle speed and road adhesion conditions. The improved AMPC method for trajectory tracking was then realized. Finally, the control effectiveness and trajectory tracking accuracy of the proposed AMPC technique were verified via co-simulation using CarSim and MATLAB/Simulink. From the results, a low lateral position error and heading angle error in trajectory tracking were obtained under different vehicle driving conditions and road adhesion conditions, producing high trajectory-tracking control accuracy. Thus, this work provides an important reference for improving the adaptability, robustness, and optimization of intelligent vehicle tracking control systems.

What problem does this paper attempt to address?

This paper mainly discusses the problem of intelligent vehicle trajectory tracking control, especially how to improve tracking accuracy and driving stability in complex driving environments and uncertain road conditions. Traditional trajectory tracking control methods, such as PID, preview control, optimal control, and model predictive control (MPC), perform poorly in handling nonlinear and time-varying characteristics. The paper proposes an improved Adaptive Model Predictive Control (AMPC) method, which takes into account tire lateral force calculation deviations and dynamically predicts time-domain adaptive models based on different driving states and road adhesion conditions of the vehicle. First, a simplified four-wheel vehicle dynamics model and the longitudinal velocity, yaw rate, and lateral acceleration of the vehicle are used as observation equations of the measurement equation. The Unscented Kalman Filter (UKF) is used to estimate the lateral forces of the front and rear tires in real time. Then, an adaptive correction estimation strategy for tire lateral stiffness is designed. By comparing the real-time estimated lateral forces by the UKF and the lateral forces based on the linear constant tire lateral stiffness, the correction factors for the lateral stiffness of the front and rear tires are defined, and the AMPC is established. In addition, a dynamic predictive time-domain adaptive model is designed based on the vehicle speed and road adhesion conditions to further optimize the proposed AMPC method and improve trajectory tracking. The paper verifies the control effectiveness and trajectory tracking accuracy of the proposed method through joint simulation software CarSim 2019 and MATLAB/Simulink 2021b. The results show that under different vehicle speeds and road adhesion conditions, the method can achieve low lateral position error and yaw angle error, improve the accuracy of trajectory tracking control, and provide a reference for improving the adaptability, robustness, and optimization of intelligent vehicle tracking control systems.

Research on Intelligent Vehicle Trajectory Tracking Control Based on Improved Adaptive MPC

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

Adaptive Model Predictive Control for Intelligent Vehicle Trajectory Tracking Considering Road Curvature

Path tracking control of automated vehicles based on adaptive MPC in variable scenarios

Variable step MPC trajectory tracking control method for intelligent vehicle

Intelligent Vehicle Path Tracking Control Based on Improved MPC and Hybrid PID

Research on Trajectory Tracking Control of Intelligent Vehicles Based on Model Predictive Control

Trajectory Tracking of Autonomous Vehicle Based on Model Predictive Control With PID Feedback

Optimal Design of MPC Autonomous Vehicle Trajectory Tracking Controller Considering Variable Time Domain

MPC-based Path Tracking Control with Forward Compensation for Autonomous Driving

Fast Trajectory Tracking Control Algorithm for Autonomous Vehicles Based on the Alternating Direction Multiplier Method (ADMM) to the Receding Optimization of Model Predictive Control (MPC)

An Improved Kinematic Model Predictive Control for High-Speed Path Tracking of Autonomous Vehicles

Path Tracking Control for Autonomous Vehicles Based on an Improved MPC

Model-Predictive-Control-Based Path Tracking Controller of Autonomous Vehicle Considering Parametric Uncertainties and Velocity-Varying

A Model Predictive Control with Preview-Follower Theory Algorithm for Trajectory Tracking Control in Autonomous Vehicles

Planning the Trajectory of an Autonomous Wheel Loader and Tracking Its Trajectory Via Adaptive Model Predictive Control

Data-Driven Enhancements for MPC-Based Path Tracking Controller in Autonomous Vehicles

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control

MPC-Based Integrated Control of Trajectory Tracking and Handling Stability for Intelligent Driving Vehicle Driven by Four Hub Motor

Automatic Vehicle Trajectory Tracking Control Based on Adaptive Model Prediction

Model-Predictive-Control-based Simultaneous Trajectory Tracking and Speed Control for Intelligent Vehicles.