Abstract:To address the issue of centrifugal force affecting the vertical load during the stability and trajectory planning of autonomous vehicles during high-speed cornering and obstacle avoidance, a model predictive control of trajectory planning and tracking is proposed that considers the roll factor using only a two-degrees-of-freedom vehicle dynamics model. Firstly, a trajectory planning controller is designed. As a predictive model, a dual-track two-degrees-of-freedom vehicle dynamics model is established. This model describes the relationship between tire lateral forces and vertical loads using a quadratic nonlinear tire model. To reflect the actual dynamic state of the vehicle, the controller incorporates a nonlinear constraint that considers vertical load variations. The nonlinear optimization problem is transformed into a simplified quadratic programming problem by using the Jacobian matrix method to linearize the constraints. By fitting a fourth-degree polynomial curve to the discrete points calculated by the replanning algorithm, an optimal collision-free trajectory is obtained. Secondly, an MPC trajectory tracking controller is designed to control the vehicle in real time along the optimal trajectory from the planning, incorporating control quantity constraints, control increment constraints, and lateral angle constraints to maintain the vehicle's motion state. We transform the trajectory tracking control problem into a quadratic programming problem, solving for the optimal control sequence for the autonomous vehicle to track the trajectory, achieving an optimized solution and rolling time domain control. Finally, the effectiveness of the vehicle's obstacle avoidance planning and tracking under high-speed double-lane-change maneuver conditions is validated using the Simulink simulation platform. The results indicate that the designed planning and tracking controllers effectively improve the obstacle avoidance planning and tracking control for high-speed autonomous vehicles.

Planning the Trajectory of an Autonomous Wheel Loader and Tracking Its Trajectory Via Adaptive Model Predictive Control

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

Trajectory Tracking Control for Flapping-wing UAV Based on Model-Free Predictive Control

Autonomous Wheel Loader Trajectory Tracking Control Using LPV-MPC

Adaptive Model Predictive Control for Intelligent Vehicle Trajectory Tracking Considering Road Curvature

Research on Intelligent Vehicle Trajectory Tracking Control Based on Improved Adaptive MPC

Trajectory Tracking Control for Autonomous Vehicle Based on Curvature Feedforward MPC

Research on Trajectory Planning and Tracking Algorithm of Crawler Paver

An accurate trajectory tracking method for low-speed unmanned vehicles based on model predictive control

Research for Nonlinear Model Predictive Controls to Laterally Control Unmanned Vehicle Trajectory Tracking

Trajectory Tracking of Autonomous Vehicle Based on Model Predictive Control With PID Feedback

Mecanum Wheel AGV Trajectory Tracking Control Based on Efficient MPC Algorithm

A novel path tracking system for autonomous vehicle based on model predictive control

A Model Predictive Control with Preview-Follower Theory Algorithm for Trajectory Tracking Control in Autonomous Vehicles

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control

MPC-based Path Tracking Control with Forward Compensation for Autonomous Driving

Model Predictive Control for Trajectory Planning Considering Constraints on Vertical Load Variation

MPC-TD3 Trajectory Tracking Control for Electrically Driven Unmanned Tracked Vehicles

Practical Nonlinear Model Predictive Controller Design for Trajectory Tracking of Unmanned Vehicles

Model predictive trajectory optimization and tracking for on-road autonomous vehicles