Abstract:Maintaining both path-tracking accuracy and yaw stability of distributed drive electric vehicles (DDEVs) under various driving conditions presents a significant challenge in the field of vehicle control. To address this limitation, a coordinated control strategy that integrates adaptive model predictive control (AMPC) path-tracking control and direct yaw moment control (DYC) is proposed for DDEVs. The proposed strategy, inspired by a hierarchical framework, is coordinated by the upper layer of path-tracking control and the lower layer of direct yaw moment control. Based on the linear time-varying model predictive control (LTV MPC) algorithm, the effects of prediction horizon and weight coefficients on the path-tracking accuracy and yaw stability of the vehicle are compared and analyzed first. According to the aforementioned analysis, an AMPC path-tracking controller with variable prediction horizon and weight coefficients is designed considering the vehicle speed's variation in the upper layer. The lower layer involves DYC based on the linear quadratic regulator (LQR) technique. Specifically, the intervention rule of DYC is determined by the threshold of the yaw rate error and the phase diagram of the sideslip angle. Extensive simulation experiments are conducted to evaluate the proposed coordinated control strategy under different driving conditions. The results show that, under variable speed and low adhesion conditions, the vehicle's yaw stability and path-tracking accuracy have been improved by 21.58\% and 14.43\%, respectively, compared to AMPC. Similarly, under high speed and low adhesion conditions, the vehicle's yaw stability and path-tracking accuracy have been improved by 44.30\% and 14.25\%, respectively, compared to the coordination of LTV MPC and DYC. The results indicate that the proposed adaptive path-tracking controller is effective across different speeds.

Hierarchical Coupling Motion Control of Distributed Vehicle Considering Vehicle Posture

Distributed Model Predictive Control for Vehicle Platoon With Mixed Disturbances and Model Uncertainties

Modular Integrated Longitudinal, Lateral, and Vertical Vehicle Stability Control for Distributed Electric Vehicles

Distributed MPC of Vehicle Platoons Considering Longitudinal and Lateral Coupling

Coordinated Control of Path Tracking and Yaw Stability for Distributed Drive Electric Vehicle Based on AMPC and DYC

Multi-Objective Collaborative Control Method for Multi-Axle Distributed Vehicle Assisted Driving

Coordinated Longitudinal and Lateral Stability Improvement for Electric Vehicles Based on a Real-Time NMPC Strategy

Multidirectional motion coupling based extreme motion control of distributed drive autonomous vehicle

Integrated longitudinal and lateral control for autonomous vehicles with active load transfer strategy at the handling limits

Adaptive differential steering strategy for distributed driving unmanned ground vehicle with variable configurations based on modified localized modelling sliding mode control

Stability Coordinated Control of Distributed Drive Electric Vehicle Based on Condition Switching

Hierarchical Model Predictive Control for Autonomous Collision Avoidance of Distributed Electric Drive Vehicle with Lateral Stability Analysis in Extreme Scenarios

Trajectory tracking control for four-wheel independent drive intelligent vehicle based on model predictive control and sliding mode control

Stability control of distributed drive electric vehicle based on adaptive fuzzy sliding mode

Distributed Drive Electric Vehicle Handling Stability Coordination Control Framework Based on Adaptive Model Predictive Control

Integrated Control of a Wheel–Track Hybrid Vehicle Based on Adaptive Model Predictive Control

Coordinated Control of Autonomous Four Wheel Drive Electric Vehicles for Platooning and Trajectory Tracking Using a Hierarchical Architecture

Decoupling motion tracking control for 4WD autonomous vehicles based on the path correction

Dynamic Decoupling and Trajectory Tracking for Automated Vehicles Based on the Inverse System

Research on torque distribution control of high-performance distributed drive multi-axle special vehicle