Abstract:Pre-chamber jet ignition is a promising combustion technology to accelerate burning velocity and improve combustion stability in natural gas engines. In this study, firstly, the ignition characteristics and the dilution limits in passive pre-chamber system with different orifice diameters were experimentally investigated based on a rapid compression machine (RCM). Methane (CH4) was used as the test fuel and CO2/N2 was used as the dilution components to simulate exhaust gas recirculation conditions in engines. Real-time combustion pressures were recorded and combustion images were captured using high-speed photography to visualize the entire jet ignition and combustion process. The experimental results showed that two different ignition behaviors were observed regarding to different orifice diameters. And no capacity of extending CO2/N2 dilution limits in the passive pre-chamber system compared to conventional spark ignition system. Then three-dimensional numerical simulations were conducted based on the experimental results. Simulation results demonstrated two ignition modes, pre-chamber jet flame ignition and pre-chamber jet autoignition, were presented due to the different jet temperatures, concentrations of immediate species, and turbulence intensities. Lastly, based on the numerical model, the effects of pre-chamber structure parameters on the ignition modes and potentials of different dilution state of mixture in pre-chamber for extending dilution limits were numerically studied. It was found that the ratio of total effective cross-sectional area of orifices to pre-chamber volume (At/VPC) was the key structure parameter of pre-chamber systems to determined different ignition modes. And there was a narrow critical range of At/VPC to achieve pre-chamber jet autoignition (PJAI) mode, beyond which PJFI mode or ignition failure occurred. The actual dilution rate of mixture in the pre-chamber affected the ignition probability and stability in the main chamber. Improving the chemical reactivity of mixture in the pre-chamber was beneficial to effectively extend the dilution limits due to the stronger thermal, chemical, and turbulent effects of pre-chamber jet.Abbreviations: PJI Pre-chamber jet ignition; CSI Conventional spark ignition; NG Natural gas; PM Particulate matter; SI Spark ignition; CI Compression ignition; THC Total hydrocarbon; SCR Selective catalyst reduction; TWC Three-way catalyst; EGR Exhaust gas recirculation; BSFC Brake specific fuel consumption; DI Direct injection; RCM Rapid compression machine; CVB Constant volume bomb; TDC Top dead center; BDC Bottom dead center; CFD Computational fluid dynamics; SOC Start of combustion; PJAI Pre-chamber jet auto-ignition; PJFI Pre-chamber jet flame ignition; TKE Turbulent kinetics energy

Enhanced Combustion of Reactivity-Controlled Turbulent Jet Ignition (RCTJI) with Rich-Oxygen for Rich Ammonia Combustion

Experimental Study of Gasoline Engine with EGR Dilution Based on Reactivity Controlled Turbulent Jet Ignition (RCTJI)

Experimental investigation on the combustion characteristics of ultra-lean premixed hydrogen/air using turbulent jet ignition

Enhancing ammonia combustion using pre-chamber turbulent jet combined with post spark ignition strategy

Experimental investigation on combustion characteristics of ammonia/air using turbulent jet ignition with auxiliary oxygen in pre-chamber

Reactivity Controlled Turbulent Jet Ignition (RCTJI) for Ammonia Engine

Optical investigation of the influence of high-reactivity iso-octane turbulent jet ignition on the combustion characteristics of ammonia/air mixtures

Experimental Observation of the Turbulent Jet Ignition for Extending the Lean Combustion Tolerance with Carbon Dioxide Diluted Mixture

Understanding Interaction Between Reactive Jets in Pre-Chamber Ignition of Gaseous Fuel

Experimental investigation on reactivity-controlled compression ignition (RCCI) combustion characteristic of n-heptane/ammonia based on an optical engine

Combustion characteristics of n-heptane spray combustion in a low temperature reform gas/air environment

Investigation of the Combustion Performance in a Three-Nozzle RQL Combustor

Mixing and Combustion Characteristics of Turbulent Non-Premixed Zero- and Low-Carbon Fuel Gas Jets

Numerical Investigation on the Jet Characteristics and Combustion Process of an Active Prechamber Combustion System Fueled with Natural Gas

Effects of annular N<sub>2</sub>/O<sub>2</sub> and CO<sub>2</sub>/O<sub>2</sub> jets on combustion instabilities and NO<sub>x</sub> emissions in lean-premixed methane flames

Ammonia-hydrogen Engine with Reactivity-Controlled Turbulent Jet Ignition (RCTJI)

Turbulent jet ignition of ultra-lean methane/air mixture under engine-like condition

Effect of CO 2 Opposing Multiple Jets on Thermoacoustic Instability and NO X Emissions in a Lean-Premixed Model Combustor

Effects of Oxy Jet in Cross-Flow on the Combustion Instability and NOx Emissions in Lean Premixed Flame

Experimental and Numerical Study of a Methane-Fueled Pre-chamber System in Rapid Compression Machine

Research on the structure of pre-chamber and jet orifice of a turbulent jet ignition rotary engine fueled with methanol/gasoline blends