Abstract:Ammonia, as a promising green fuel for achieving carbon neutrality and zero-carbon emissions, encounters obstacles in practical engine applications due to its intrinsic combustion properties like low burning velocity and high autoignition temperature. Hydrogen-assisted pre-chamber turbulent jet ignition (TJI) technology has recently demonstrated great potential in extending the lean limits and enhancing the stability of ammonia combustion. As such, this study conducts a comprehensive analysis on the flame development and emission formation processes under the active pre-chamber TJI mode fueled with ammonia and hydrogen using computational fluid dynamics (CFD) modeling integrated with detailed chemical kinetics, particularly focusing on the effects of hydrogen energy ratio and spark timing. It is found that the active ammonia-hydrogen TJI engine is typically characterized by four primary physical processes involving H2 mixture preparation in the pre-chamber, flame kernel formation and development within the pre-chamber, the formation and ejection of hot jet across the orifices, and the turbulent flame initiation and propagation in the main chamber. Hydrogen injection holds a scavenging effect on the residuals in the pre-chamber while forms fuel stratification near the spark plug, enhancing the ignition stability. Besides, the current combustion mode is commonly characterized by two-stage heat release in the main chamber, but exhibits a three-stage heat release as increasing the premixed H2 ratio. The first stage is dominated by a hot jet flame, the second stage is characterized by turbulent flame propagation or autoignition, and the third stage is induced by a secondary jet ejected from the pre-chamber, which becomes more prominent as the H2 ratio increases. Hydrogen blending could not only facilitate the turbulent flame propagation of NH3-air mixture in the main chamber but also enhance the initiation of flame kernel in the pre-chamber, thereby promoting the overall combustion process and potentially improving the thermal efficiency. The N2O emission is produced in two distinct stages, wherein N2O is generated and undergoes conversion during the main combustion phase, while unburned crevice gases mix with burned gases and convert into N2O during the expansion stroke. Increasing the premixed hydrogen ratio leads to an increased in-cylinder temperature, which in turn facilitates a reduction in N2O emissions and mitigates unburned ammonia. Furthermore, optimization of the spark timing is required after implementing the hydrogen addition into the intake manifold to achieve desirable combustion phasing and further improve the thermal efficiency. Finally, a novel combustion concept, denoted as TJI assisted compression ignition mode, is proposed for achieving high thermal efficiency in ammonia engines via adopting high compression ratio and premixed ammonia-hydrogen charge under the TJI strategy.

Enhancing ammonia combustion using pre-chamber turbulent jet combined with post spark ignition strategy

Combustion of Premixed Ammonia and Air Initiated by Spark- Ignited Micro-gasoline-jet in a Constant Volume Combustible Vessel

Numerical Investigation of Diesel Spray Combustion Characteristics in the Ammonia/air Atmosphere

Enhanced combustion of ammonia engine based on novel air-assisted pre-chamber turbulent jet ignition

Experimental investigation on combustion characteristics of ammonia/air using turbulent jet ignition with auxiliary oxygen in pre-chamber

A Comparative Study on the Premixed Ammonia/hydrogen/air Combustion with Spark Ignition and Turbulent Jet Ignition

Analysis of the combustion characteristics of ammonia/air ignited by turbulent jet ignition with assisted hydrogen injection in pre-chamber

Experimental Investigation on the Combustion Characteristics of NH3/H2/air by the Spark Ignition and Turbulent Jet Ignition

Experimental study on gasoline-ammonia combustion characteristics with pre-chamber jet ignition

Optical investigation of the influence of high-reactivity iso-octane turbulent jet ignition on the combustion characteristics of ammonia/air mixtures

A Novel Concept of Pre-Chamber Turbulent Jet Ignition-Induced Liquid Ammonia Spray Flame

Visualization study on the effects of pre-chamber jet ignition and methane addition on the combustion characteristics of ammonia/air mixtures

Effect of Ammonia Addition on Combustion Characteristics of Hydrogen/air Using Passive Turbulent Jet Ignition

Computational Insights into Flame Development and Emission Formation in an Ammonia Engine with Hydrogen-Assisted Pre-Chamber Turbulent Jet Ignition

A Comparative Study on the Combustion of Lean NH3/H2/air Ignited by Pre-Chamber Turbulent Jet Ignition Modes

Optical investigation of ammonia rich combustion based on methanol jet ignition by means of an ignition chamber

Jet Ignition Characteristics of Ammonia-Hydrogen Passive Pre-Chamber: Emphasis on Equivalence Ratio and Hydrogen/ammonia Ratio

Numerical Study on the Combustion Characteristics of an Ammonia/Hydrogen Engine with Active Prechamber Ignition

Study on the effect of turbulent jet combustion chamber on combustion characteristics at different ammonia energy ratio and optimization of an ammonia-diesel dual-fuel engine

Visualization Investigation of Jet Ignition Ammonia-Methanol by an Ignition Chamber Fueled H2

Visualization investigation of jet ignition ammonia-methanol by an ignition chamber fueled H 2