Abstract:Pre-chamber jet ignition is a promising combustion technology to accelerate burning velocity and improve combustion stability in natural gas engines. In this study, firstly, the ignition characteristics and the dilution limits in passive pre-chamber system with different orifice diameters were experimentally investigated based on a rapid compression machine (RCM). Methane (CH4) was used as the test fuel and CO2/N2 was used as the dilution components to simulate exhaust gas recirculation conditions in engines. Real-time combustion pressures were recorded and combustion images were captured using high-speed photography to visualize the entire jet ignition and combustion process. The experimental results showed that two different ignition behaviors were observed regarding to different orifice diameters. And no capacity of extending CO2/N2 dilution limits in the passive pre-chamber system compared to conventional spark ignition system. Then three-dimensional numerical simulations were conducted based on the experimental results. Simulation results demonstrated two ignition modes, pre-chamber jet flame ignition and pre-chamber jet autoignition, were presented due to the different jet temperatures, concentrations of immediate species, and turbulence intensities. Lastly, based on the numerical model, the effects of pre-chamber structure parameters on the ignition modes and potentials of different dilution state of mixture in pre-chamber for extending dilution limits were numerically studied. It was found that the ratio of total effective cross-sectional area of orifices to pre-chamber volume (At/VPC) was the key structure parameter of pre-chamber systems to determined different ignition modes. And there was a narrow critical range of At/VPC to achieve pre-chamber jet autoignition (PJAI) mode, beyond which PJFI mode or ignition failure occurred. The actual dilution rate of mixture in the pre-chamber affected the ignition probability and stability in the main chamber. Improving the chemical reactivity of mixture in the pre-chamber was beneficial to effectively extend the dilution limits due to the stronger thermal, chemical, and turbulent effects of pre-chamber jet.Abbreviations: PJI Pre-chamber jet ignition; CSI Conventional spark ignition; NG Natural gas; PM Particulate matter; SI Spark ignition; CI Compression ignition; THC Total hydrocarbon; SCR Selective catalyst reduction; TWC Three-way catalyst; EGR Exhaust gas recirculation; BSFC Brake specific fuel consumption; DI Direct injection; RCM Rapid compression machine; CVB Constant volume bomb; TDC Top dead center; BDC Bottom dead center; CFD Computational fluid dynamics; SOC Start of combustion; PJAI Pre-chamber jet auto-ignition; PJFI Pre-chamber jet flame ignition; TKE Turbulent kinetics energy

Experimental Study of Gasoline Engine with EGR Dilution Based on Reactivity Controlled Turbulent Jet Ignition (RCTJI)

Experimental Observation of the Turbulent Jet Ignition for Extending the Lean Combustion Tolerance with Carbon Dioxide Diluted Mixture

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Reactivity Controlled Turbulent Jet Ignition (RCTJI) for Ammonia Engine

Enhanced Combustion of Reactivity-Controlled Turbulent Jet Ignition (RCTJI) with Rich-Oxygen for Rich Ammonia Combustion

Experimental Study on Combustion Characteristics of a Fischer‐tropsch Diesel/methanol Reactivity Controlled Compression Ignition Mode Engine

Research on the structure of pre-chamber and jet orifice of a turbulent jet ignition rotary engine fueled with methanol/gasoline blends

Turbulent jet ignition of ultra-lean methane/air mixture under engine-like condition

Ammonia-hydrogen Engine with Reactivity-Controlled Turbulent Jet Ignition (RCTJI)

Experimental Study of Combustion Strategy for Jet Ignition on a Natural Gas Engine

Experimental studies on combustion and emissions of RCCI (reactivity controlled compression ignition) with gasoline/n-heptane and ethanol/n-heptane as fuels

Numerical Investigation on the Effect of Reactivity Gradient in an RCCI Engine Fueled with Gasoline and Diesel

Exploring the coupling mechanism between piston structure and turbulent jet ignition mode in hydrogen mixed natural gas rotary engines

Research and evaluation of turbulent jet ignition mode for improving combustion performance of ethanol rotary engine

Experimental investigation on the combustion characteristics of ultra-lean premixed hydrogen/air using turbulent jet ignition

Simulation Investigation of Turbulent Jet Ignition (TJI) Combustion in a Dedicated Hybrid Engine under Stoichiometric Condition

A Parametric Study for Enabling Reactivity Controlled Compression Ignition (RCCI) Operation in Diesel Engines at Various Engine Loads

Experimental and Numerical Study of a Methane-Fueled Pre-chamber System in Rapid Compression Machine

Potential for Reducing Emissions in Reactivity-Controlled Compression Ignition Engines by Fueling Syngas and Diesel

A Shock Tube Experimental and Modeling Study of Multicomponent Gasoline Surrogates Diluted with Exhaust Gas Recirculation

Numerical investigation of the effect of jet orifice parameters on the combustion process of a turbulent jet ignition rotary engine fueled with methanol/gasoline blends