Abstract:To improve the comprehensive performance of aluminum alloy and expand its application range, a laser cladding technology was used to a prepare Ni-Cr-B-Si alloy cladding layer, adding 4% CeO2, 5% Y2O3, and 5% La2O3 on the surface of 6063Al. The distribution of elements, the nucleation and growth mechanism of the interface transition and upper cladding layers, and the action mechanism of rare earths were analyzed from the thermodynamics, kinetics, and solidification perspectives. Results show that the cladding layer is mainly composed of a thin interface transition layer at the bottom and a thick cladding layer at the top. There are numerous pores and cracks in the interface transition layer of the Ni-Cr-B-Si cladding layer, part of the cladding layer is peeled off, and the structure is obviously segregated. However, the cladding layer adding with 4% CeO2, 5% Y2O3 and 5% La2O3 has no obvious pores, cracks and shedding, its grain distribution is more dispersed, and the structure is refined. The organization state from good to poor follows the order Ni60 + 4%CeO2 cladding layer, Ni60 + 5%Y2O3 cladding layer, and Ni60 + 5%La2O3 cladding layer. It was found through research that the addition of rare earth can improve the fluidity of the molten pool during the solidification of the cladding layer and purify the molten pool, and most of the rare earths are segregated at the grain boundary and phase boundary, which strengthens the grain boundary and phase boundary. The strengthening mechanism of the cladding layer is solid solution strengthening and fine grain strengthening, and the Ni60 + 4% CeO2 cladding layer also has a strengthening mechanism of dispersion strengthening.

Synchronous Optimization of Surface Flatness and Interfacial Bonding Strength in Laser Cladding by Marangoni Flow

Marangoni flow patterns of molten pools in multi-pass laser cladding with added nano-CeO2

Multicomponent Multiphase Modeling of Dissimilar Laser Cladding Process with High-Speed Steel on Medium Carbon Steel

Multi-Phase Flow Modelling Of Laser Cladding Process With T15 High Speed Steel Particles

Optimizing solidification dendrites and process parameters for laser powder bed fusion additive manufacturing of GH3536 superalloy by finite volume and phase-field method

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Simulation and experimental investigations on the effect of Marangoni convection on thermal field during laser cladding process

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Effects of CeO2 on the Microstructure and Properties of Laser Cladding 316L Coating

Revealing Multiphysics Effects on Microstructure Characteristics in Powder-Fed Laser Cladding Based on a Comprehensive Model

Modeling for evaluating the effect of powder flow during laser cladding process: From thermal and flow fields to microstructure of the molten pool

Nucleation and strengthening mechanism of laser cladding aluminum alloy by Ni-Cr-B-Si alloy powder based on rare earth control

Evolutionary Mechanism of Solidification Behavior in the Melt Pool during Disk Laser Cladding with 316L Alloy

Enhancing Surface Properties of Cu-Fe-Cr Alloys through Laser Cladding: The Role of Mo and B4C Additives

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

Optimization of Process Parameters, Microstructure, and Properties of Laser Cladding Fe-Based Alloy on 42CrMo Steel Roller

Influence mechanism of active elements on multi-field coupling in laser cladding Fe60 process

Tailoring the Mechanical Properties of Laser Cladding-Deposited Ferrous Alloys with a Mixture of 410L Alloy and Fe–Cr–B–Si–Mo Alloy Powders

Microstructure Design of Controlling Crack of Fe-based Laser Cladding Layer

Numerical simulation method of the multi-field coupling mechanism for laser cladding 316L powder

Investigation on composition distribution of dissimilar laser cladding process using a three-phase model