Abstract:Permanent magnet torque motor (PMTM) is widely used in aerospace, computer numerical control (CNC) machine tools, and industrial robots with many advantages such as high torque density, strong overload capacity, and low torque ripple. With the upgrading of industrial manufacturing, the requirements for the performance of torque motors have become more stringent. At present, how to achieve high output torque and low torque ripple has become a research hotspot of torque motors. In the optimization process, it is necessary to increase the output torque while the torque ripple can be reduced, and it is difficult to get a good result with the single-objective optimization. In this paper, a multi-objective optimization method based on the combination of design parameter stratification and support vector machine (SVM) is proposed. By analyzing the causes of torque ripple, the output torque, efficiency, cogging torque, and total harmonic distortion (THD) of back electromotive force (EMF) are selected as the optimization objectives. In order to solve the coupling problem between the motor parameters, the calculation formula of Pearson correlation coefficient is used to analyze the relationship between the design parameters and the optimization objectives, and the design parameters are layered ac-cording to the sensitivity. In order to shorten the optimization cycle of the motor, SVM is used as a fitting method of the mathematical model. The performance between initial and optimal motors is compared, and it can be found that the optimized motor has a higher torque and lower torque ripple. The simulation results verify the effectiveness of the proposed optimization method.

An Optimization Method for End Effect Suppression of Arc Permanent Magnet Torque Motor

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

Computational Technologies for Low-Frequency Torque Ripple Suppression in Exterior-Rotor Permanent Magnet Motors

Torque and Radial Force Optimization of Arc Flux Switching Permanent Magnet Linear Motor Used for Large Scanning Equipment

Optimization of the Different Pole Arc Combination to Reduce the Cogging Torque in PMDC Motors

Detent Force Analysis and Optimization of Permanent Magnet Linear Synchronous Motor

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Research on Cogging Torque Reduction Based on Multi-Parameter Optimization of Auxiliary Slots and Pole-Arc Coefficient

Cogging Torque Reduction in External-Rotor Permanent Magnet Torque Motor Based on Different Shape of Magnet

Reducing Torque Ripple Through Innovative Configuration of Permanent Magnet Based on Air Gap Field Modulation Theory in a Novel Axial Flux Reversal Permanent Magnet Machine

Modeling and Suppression of Torque Ripple in PMSM Based on the General Airgap Field Modulation Theory

Multi-Objective Optimization Design of Permanent Magnet Torque Motor

Optimization of cogging torque in outer rotor Permanent Magnet Synchronous Motors based on particle swarm algorithm

Research on the Torque Ripple and Scanning Range of an Arc-Structure PMSM Used for Scanning System

Modeling, Analysis, and Suppression of Demagnetization for MTPA-Driven Permanent Magnet Motors With Distributed Windings

Torque Improvement of Dual-Rotor Coreless Stator AFPM Machine With Non-Overlapping Concentrated Winding for Counter-Rotating Ducted Fan Application

Suppression of Torque Ripple of a Flux-Switching Permanent Magnet Motor in Perspective of Flux-Modulation Principle

Torque Ripple Suppression of Flux-Switching Permanent Magnet Machine Based on General Air-gap Field Modulation Theory