Abstract:In recent years, more than 6 million room temperature vulcanized (RTV) silicone rubber coated cap and pin insulators with high mechanical ratings were used in ultrahigh voltage transmission lines in China to improve pollution performance. However, the unexpected puncture phenomena of RTV coated insulators were exposed during steep-front impulse voltage tests; for instance, the steep-front impulse voltage test pass rate decreased to less than 50% for 550 kN glass insulators with RTV coatings. The steep-front impulse voltage test is the most effective method used to check the insulation quality of cap and pin insulators. This unexpected phenomenon once caused serious concerns to power utilities. In this paper, several possible factors that affect the puncture of insulators were analyzed. Then, the extent of the decline in the breakdown of the 550 kN glass cap and pin insulators with and without RTV coatings were studied. The initial puncture location was then found, and the developmental process of the arc on the insulator surface in steep-front impulse voltage tests was observed with an ultra-high-speed intensified charge coupled device camera. Lastly, a breakdown mechanism is proposed. The puncture phenomena of a RTV coated insulator in a steep-front impulse voltage test is essentially an electrical breakdown of the internal insulation. The RTV coating induces the close adherence of the arc to the surface of the insulator. Such closeness changes the arc development path on the insulator surface and facilitates easy breakdown in the shed weak part. All these factors result in a significant increase in the breakdown probability of RTV coated insulators in steep-front impulse voltage tests.

Lightning Impulse Flashover Characteristics of Glass Insulator String with RTV Coating

Breakdown mechanism of RTV silicone rubber coated insulators under steep-front impulse voltage

Pollution Flashover Performance of 220kv Glass Insulator Strings Covered with Incomplete Spraying Prtv Coatings

A Study on the Discharge along RTV Coated Insulators

Flashover Mechanism of RTV Coated Insulators

Study on Pollution Flashover Characteristics of RTV Coating Disc Suspension Insulators with Different Local Defects

Application of Pre-Coated Rtv Insulators in Uhv Ohls and Steep-Front Impulse Voltage Test

Pollution Flashover Performance of RTV Coatings with Partial Damage

Study of the effect of ice adhesion on electrical power transmission insulator

Puncture Phenomena and Mechanism Analysis of a RTV Coated Cap and Pin Insulators in a Steep-Front Impulse Voltage Test

Pollution Flashover Characteristics of Insulators Partly Coated by Semi-conductive RTV

Icing Flashover Characteristics of EHV AC Transmission Line Insulator Strings

Study on AC Flashover Process of Iced 110 kV Insulator Strings

Icing flashover characteristics and discharge process of 500 kV AC transmission line suspension insulator strings

Study of Anti-Icing Performance of Insulator Strings Bottom-Coated with Semiconductive Silicone Rubber Coating

Leakage current analysis on RTV coated porcelain insulators during long term fog experiments

Breakdown Process Experiments of 110-to 500-Kv Insulator Strings under Short Tail Lightning Impulse

Effect of Combination Room Temperature Vulcanized Silicone Rubber on Electric Field Distribution of Insulators

Field Aging Investigation and Filler Precipitation Analysis on Rtv Coated Insulators in China

Flashover Performance of Pre-contaminated and Ice-covered Composite Insulators to be Used in 1000 kV UHV AC Transmission Lines

Icing Flashover Performance of HVDC Transmission Lines