Abstract:As actuator of the force-rebalanced servo loop, the electrostatic force generator of the micro-accelerometer shows high nonlinearity while the interpole of the micro-electro-mechanical system(MEMS) sensor is far away from its balance position. The control system cannot rebalance itself with the limited bandwidth after an external long overload, because the characteristics of the force generator differ from normal case. Although for similar problems, solutions with cascading lead-lag blocks, with the anti-windup(AW) technology, or with the sliding-mode control, are widely reported, the problems such as performance loss or difficulty to synthesize a digital controller still remain. Based on existing researches, remedies are developed by analyzing the characteristic of the system not only near the balance position, but also corresponding to the whole moveable range of the interpole, and a new controller is proposed. The solution is compared with the common solutions of cascading lead-lag blocks method, AW methods, and sliding mode methods. Comparison results show that the proposed solution avoid performance loss, compared to cascading lead-lag blocks solution; the proposed solution is easily synthesized and implemented in the analog servo loop of the micro-accelerometer, compared to digital AW methods; at the same time, the proposed solution avoids suffering the chattering effect problem but just utilize it, compared to the sliding-mode control solution. Nevertheless, comparison results show the solution is lack of commonality, since the solution is only more suitable to micro electrostatic force-rebalance system. The SIMULINK models with and without the proposed solution, taking typical micro-accelerometer parameters, have been set up for simulation; corresponding experiments utilizing electrometric method are also conducted after the successful simulations. Simulation and experiment results verify that the micro-accelerometer will reliably return to normal operation after external long overload with the proposed solution. Therefore, it is expected to design the analog servo loop of high performance micro electrostatic force-rebalance system so as to ensure the rebalance after long overload without performance loss.

Pendulous Accelerometer Dynamics Enhanced Via Torque Balance Optimization Control

Novel control strategy of force-balance accelerometers for measurement error minimization

Optimal Force-Balance Control of Closed-Loop Sensing Systems with Time Delay

Fuzzy Sliding-Mode Control of the Electrostatically Tuned Quasi-Zero Stiffness MEMS Accelerometer.

Adaptive Robust Motion Control of a Fast Forging Hydraulic Press Considering the Nonlinear Uncertain Accumulator Model.

Convex Parameterization of Uncertain Pendulous Accelerometer with Mixed H2/H∞ Robust Optimal Control

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Control Algorithm Design of a Force-Balance Accelerometer

-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study

Adaptive Robust Dynamic Balance and Motion Control of Mobile Wheeled Inverted Pendulums

Optimized Controller for Electrostatic Force Feedback Micro Accelerometers

Influence of Feedback Compensation on Dynamic Property for High-Q Capacitive Accelerometers

Adaptive optimal control of under-actuated robotic systems using a self-regulating nonlinear weight-adjustment scheme: Formulation and experimental verification

Operational Space Balancing Control Based on Integrated CoM Dynamics for Underactuated Triple Pendulum Robot

Compact Hinfinity robust rebalance loop controller design for a micromachined electrostatically suspended gyroscope.

A Novel Controller Design for the Next Generation Space Electrostatic Accelerometer Based on Disturbance Observation and Rejection

Analysis and Prevention for Oscillation Failure of Capacitive Micro-Accelerometers

An enhanced coupling nonlinear control for quadrotor with suspended double‐pendulum payload

Compact robust rebalance loop controller design for a micromachined electrostatically suspended gyroscope

Synchronization Control with Dynamics Compensation for Three-Axis Parallel Motion Platform

Stabilization Control of a MEMS Accelerometer With Tuned Quasi-Zero Stiffness