Abstract:The peristaltic pump is a high precision biomimetic pump widely used in the medical industry. However, the pump has flow pulsation, due to its special structure. The serious flow pulsation can dramatically reduce delivery accuracy and stability. Meanwhile, the service life of the peristaltic pump is affected by the conveying capacity. The flow pulsation degree and transportation capacity of the pump are affected by the structural parameters of its key components. An in-depth study of peristaltic pumps is necessary in order to reduce the degree of pulsation and increase service life. The paper skillfully combines the fluid-solid interaction (FSI) mechanism model with the surrogate model to deeply study the influence of key structural parameters of the peristaltic pump on its performance, and the multi-objective optimization design of the pump is carried out by using the multi-island genetic algorithm (MIGA). The results show that for the average flow, the hose inner diameter has the greatest influence, followed by the working circle diameter. The roller diameter has very little effect. The hose inner diameter and working circle diameter have a minor coupling effect on the roller diameter. It slightly affects the trend of the average flow rate with the roller diameter. The hose inner diameter also has a slight coupling effect on the working circle diameter. For the instantaneous flow rate percentage, the effects of all three key parameters are significant. The hose inner diameter has an obvious coupling effect on the working circle diameter and the roller diameter, which affects the trend of the instantaneous flow rate percentage with the working circle diameter and the roller diameter. The optimized pump has a 43.3% decrease in the percentage of flow rate and a 59.6% increase in the average flow rate, indicating significant improvements in transport stability and capacity.

Based on the Combination of Fluid–solid Interaction Mechanism Model and Surrogate Model for Peristaltic Pump Performance Analysis and Multi-Objective Optimization Design

Structure optimization design of extracorporeal circulation blood transport pump

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Flow characteristics simulation and low-noise design of fuel piston pump

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Optimization of Bellows in Bellows Pumps for Higher Pumping Efficiency

The Optimization of A Low Specific Speed Pipeline Pump

Research on Multi-Objective Optimization of Low Pulsation Unloading Damping Groove of Axial Piston Pump

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

Analysis and Optimization on U-shaped Damping Groove for Flow Ripple Reduction of Fixed Displacement Axial-Piston Pump

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Diagnosis by ultrasound of congenital dislocation of the hip joint.

Multi-objective Optimization of Micron-Scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps

Optimization of Cross Angle Based on the Pumping Dynamics Model

Design of an Sma Peristaltic Pump

Modelling the pulsatile flow rate and pressure response of a roller-type peristaltic pump

Pre-Compression Volume on Flow Ripple Reduction of a Piston Pump

Optimization Design for an Impeller of the Multiphase Rotodynamic Pump Handling Gas-Liquid Two-Phase Flow

Raising the Speed Limit of Axial Piston Pumps by Optimizing the Suction Duct

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Flow Ripple Reduction of Axial-Piston Pump by Structure Optimizing of Outlet Triangular Damping Groove