Abstract:This brief presents a dual-band balanced filter with wide stopband, controllable transmission zeros and bandwidths, and compact size based on a newly designed electromagnetically coupled stepped impedance resonator (SIR) pair. The proposed SIR contains three different impedance lines, which can lead to more degrees of design freedom for resonant frequency control. Two electrical length ratios of the SIR can be individually tuned to obtain two desired differential-mode (DM) resonant frequencies for dual-band design, while keeping the first spurious frequency far away for wide-stopband design. Moreover, an inherent common-mode (CM) suppression can also be obtained without adding extra structures due to the discriminating CM resonant frequencies. The mechanism of transmission zeros (TZs) generation is also investigated by means of phases and admittance analysis. It reveals that four TZs around the two operating bands can be flexibly controlled via adjusting the ratio of magnetic and electric coupling coefficients of the SIR pair as well as the coupling space of the feeding lines, which have greatly enhanced the passband selectivities and the band-to-band isolation. Subsequently, the graphs of coupling coefficients and external quality factors for the filter design are extracted, showing sufficient degrees of design freedom for bandwidth control. The proposed dual-band balanced filter is finally fabricated and measured at 1.75 GHz and 3.64 GHz, respectively. Measured results are in good agreement with the simulated ones. Compared with the state-of-the-art works, the proposed circuit performs a deeper and wider stopband of 4.5f 1 d with 40dB attenuation (where f 1 d is the fundamental frequency), and more than 50-/45-dB in-band CM suppressions with compact size (0.14λ g × 0.27λ g , where λ g is the guided wavelength of the fundamental frequency).

A Bandwidth-Tunable Balanced Filter with a Broad Tuning Range and a Wide Minimum Bandwidth

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

Optimization and Design of Balanced BPF Based on Mixed Electric and Magnetic Couplings

A 0.61‐2.39 GHz Fully Tunable Bandpass Filter with Minimum Number of Loaded Varactors

A Fully Tunable Bandpass Filter Using A Varactor-Tuned Short-Stub Loaded Resonator

Tunable Balanced Bandpass Filter with Constant Absolute Bandwidth and High Common Mode Suppression

Tunable Differential-Mode Bandpass Filters with Wide Tuning Range and High Common-Mode Suppression

A Voltage-Controlled Tunable Differential Dual-Band Bandpass Filter with Compact Size and Wide Tuning Range

Compact Tunable Wideband Bandpass Filter Using Mixed Coupling Lumped Dual-Mode Resonator

A Balanced Dual-Band Bandpass Filter with Independently Tunable Differential-Mode Frequencies

A Balanced Bandpass Filter with Ultra-Wide Stopband and Common-mode Suppression

A fully tunable two-pole bandpass filter with wide tuning range based on half mode substrate integrated waveguide

Balanced Bandpass Filter with Reconfigurable Frequency and Bandwidth Based on Multi-Mode Resonator

High Selectivity Balanced Bandpass Filter with Tunable Bandwidth Using Stub-Loaded Resonator

A Tunable Balanced Phase Shifter with Wide Operating Bandwidth

Three‐pole Wide‐tuning‐range Balanced Frequency‐agile Bandpass Filter with Constant Absolute Bandwidth and 3 Transmission Zeros

Compact Wide-Stopband Dual-Band Balanced Filter Using an Electromagnetically Coupled SIR Pair with Controllable Transmission Zeros and Bandwidths.

Tunable Balanced Bandpass Filter With Constant Bandwidth and High Common-Mode Suppression

Design of A Dual-Mode Tunable Wide-Bandstop Filter with Controllable Bandwidth

High Selectivity Wideband Balanced Filter Based on Modified Coupled Lines Structures