Abstract:This paper presents a novel design of a wideband millimeter-wave balanced bandpass filter (BPF) for use in a high-sensitivity Q-band reception system for solar radio spectrum observation. The balanced BPF has differential-mode (DM) band-pass and common-mode (CM) band-stop characteristics, which effectively suppress noise and reduce electromagnetic interference in its operating frequency band. The filter design incorporates half-wavelength rectangular micro-coaxial transmission lines as resonators and coupling between resonators is achieved through J-inverters. The wideband CM suppression is improved by adjusting the distribution of CM transmission zeros by adding open-circuited branches on the symmetrical plane. The micro-coaxial structure is fabricated on a 4-inch silicon wafer through a three-dimensional additive manufacturing process. The compactness, low loss, and wideband performance make it ideal for this application. As a design example, a fifth-order Chebyshev balanced BPF was fabricated and measured to demonstrate the design method. The measured results indicate that the balanced BPF operates within a frequency range of 30-50GHz, with an insertion loss of 1.63dB and over 26dB CM suppression in the DM passband. These results are in general agreement with simulation results. To the best of our knowledge, this is the first time that a micro-coaxial structure has been proposed for this application.

A Balanced Bandpass Filter with Ultra-Wide Stopband and Common-mode Suppression

High-Selectivity Balanced Bandpass Filter with Mixed Electric and Magnetic Coupling

High‐performance balanced dual‐band bandpass filter with controllable bandwidth and frequency ratio

A Fully Packaged Bandpass Filter on Stripline Patch Resonator With Wide Upper Stopband

High Common-Mode Rejection Wideband Balanced Bandpass Filter Based on Dual-Mode Semicircular Patch Resonator and DGSs

Design of Tri-Band Balanced Filter with Wideband Common-Mode Suppression and Upper Stopband Using Square Ring Loaded Resonator

Broadband Balanced Filter with High Common-Mode Suppression and Wide Stopband Based on SIW and SSPP

High selectivity and common-mode suppression balanced bandpass filter with TM dual-mode SIW cavity

Design of compact balanced filters with wide DM upper stopband and CM rejection band based on semi‐circular patch

Q-band balanced bandpass filter based on rectangular micro-coaxial transmission line with improved common-mode suppression

Wideband Balanced Bandpass Filter with Common-Mode Noise Absorption Using Double-Sided Parallel-Strip Line

High Selectivity and CM Suppression Frequency-Dependent Coupling Balanced BPF

High-selectivity single-ended and balanced bandpass filters using ring resonators and coupled lines loaded with multiple stubs

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

Narrow‐band bandpass filter with very wide upper stopband

Balanced Dual-Band HTS BPF with Controllable Frequency Ratio and Transmission Zeros Using Mixed Cross-Coupling

Balanced tri- and quad-band BPFs based on SIR with improved passbands selectivity

Analysis and design of a wide stop‐band and high out‐of‐band suppression BPF

Compact Tunable Balanced Bandpass Filter with Constant Bandwidth Based on Magnetically Coupled Resonators

Novel Balanced Single/Dual-band Bandpass Filters Based on Circular Patch Resonator

Three‐pole Wide‐tuning‐range Balanced Frequency‐agile Bandpass Filter with Constant Absolute Bandwidth and 3 Transmission Zeros