Abstract:The jack-up rig is the most widely applied mobile platform in the shallow-water offshore drilling. Since several predetermined target wells are in the soil stratum of sand overlying clay, the punch-through accidents occur frequently during the jack-up rig spudcan penetration leading to disastrous consequences and sometimes even casualties. Although a few centrifugal model experiments and indoor large-scale experiments have been conducted to simulate the spudcan penetration, these experiments expose significant knowledge gaps that deviate from the actual field operations due to the limitations of a constant displacement speed plan instead of multi-stage preloading plan. In this study, seventeen (17) field experiments simulating spudcan installation in sand overlying clay in in-situ soil strata in the intertidal sea of the Bohai Bay are reported to address the knowledge gaps. A systematic study of the spudcan penetration is presented through key influencing factors such as soil strength ratio of upper sand to lower clay, geometric ratio of spudcan diameter to upper sand thickness, ballasting speed and holding period time. Results indicate that the ultimate (peak) soil bearing capacity increases almost quadratically with the increase in strength ratio of upper sand to lower clay; the final spudcan penetration resistance decreases as a power law relationship with the increase in geometric ratio of spudcan diameter to upper sand thickness; the instantaneous spudcan penetration velocity increases as a logarithmic function with the increase in ballasting speed and the pore water pressure decreases as an exponential function with the increase in holding period time. From these experiments, three novel schemes are proposed to prevent the punch-through. Lastly, this study provides a design basis and theoretical guidance for precise calculations of the ultimate bearing capacity, accurate analysis of punch-through risk and effective prevention of the punch-through accidents in the real jack-up rig.

A New Method for Predicting the Penetration Curve of Spudcan on Stiff-over-soft Clay

Predicting the ultimate bearing capacity of spudcan in stiff-over-soft clay based on a failure model varying with soil parameter

Three-Dimensional DEM Simulation of Plugging Behaviour of Small-Diameter Open-Ended Model Piles Penetrating Into Sand

Effects of spudcan installation processes on the bearing capacity of foundations under combined loading in soft-over-stiff clay

Undrained Bearing Capacity of Spudcan under Combined Loading

Capacity of spudcan foundation on dense sand overlying clay under combined loading

Modelling T-bar Penetration in Soft Clay Using Large-Displacement Sequential Limit Analysis

Assess the Effects of Loading Rate and Interface Roughness on T-bar Penetration Resistance

Improved Prediction of Peak Resistance for Spudcan Penetration in Sand Layer Overlying Clay

Numerical modelling on effect of loading rate on uplift behavior of suction caissons

Probabilistic prediction of spudcan peak penetration resistance based on parameter estimation and sectionalized adaptive linear simplification

Bearing Capacity of Spudcan Foundations in a Spatially Varying Clayey Seabed

Probabilistic Punch-Through Distance for A Spudcan Penetrating Sand-Over-Clay

Investigation of the peak punch-through capacity of spudcan on sand overlying spatially variable clay

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Model Tests on Installation Techniques of Suction Caissons in A Soft Clay Seabed

Field experimental investigation of punch-through for different operational conditions during the jack-up rig spudcan penetration in sand overlying clay

Experimental modelling of spudcan penetration in spatially variable soils

Bayesian prediction of peak resistance of a spudcan penetrating sand-over-clay

Probabilistic Site-Characterisation Using Monitored Spudcan Installation Data

Simulation-Based Analysis Of Spudcan Interaction With Soil