Abstract:Dynamic testing of high-resolution Sigma-Delta $(\Delta\Sigma)$ Analog-to-Digital converters (ADCs) is extremely challenging and expensive since it requires the use of spectrally pure stimulus with at least 10dB better signal-to-noise ratio (SNR) and total harmonic distortion (THD) than the ADC under test. This paper presents a low cost model parameter estimation based test and diagnosis methodology for the dynamic specifications of high-precision $\Delta\Sigma$ ADCs using a multi-tone test input. In the proposed test methodology, the response of a behavioral model of the ADC incorporating its key module level non-idealities is matched with the response of the ADC under test by solving a nonlinear optimization problem that finds the best non-ideality parameters corresponding to the observed DUT test response. The dynamic specifications of the ADC are then calculated from the derived model parameters. The multi-tone test stimulus is designed in such a way as to maximize the accuracy with which the model non-ideality parameters can be calculated from the observed test response using a genetic test stimulus optimization algorithm. For test response analysis, the digital pulse sequence at the output of the sigma-delta modulator is made externally observable and utilized as a test access point. A key contribution is that the dynamic specifications such as ENOB, SNR, and THD of the converter as well as module level non-idealities contributing to those specifications can be simultaneously determined from the derived model parameters. The test method is fast and diagnosis is very accurate. Simulation results indicate the validity of the proposed methodology.

Low-Cost Linearity Testing of High-Resolution ADCs Using Segmentation Modeling and Partial Polynomial Fitting

Modeling of a 14-bit, 100-MS/s pipelined ADC with digital nonlinearity calibration

Modeling of digital background calibration with signal-dependent dithering for a 14-bit, 100-MS/s pipelined ADC

Low power design for 14-bit 100MSPS pipelined ADC

USER-SMILE: Ultrafast Stimulus Error Removal and Segmented Model Identification of Linearity Errors for ADC Built-in Self-Test

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

High-Resolution ADC Linearity Testing Using a Fully Digital-Compatible BIST Strategy

A Fully Digital-Compatible BIST Strategy for ADC Linearity Testing

A 65-Nm Low-Power High-Linearity ΣΔ ADC for Audio Applications

A Low-Cost On-Chip Built-In Self-Test Solution for ADC Linearity Test

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

INL and DNL Estimation Based on Noise for ADC Test

A 14-Bit Pipelined ADC with Digital Background Nonlinearity Calibration.

A/D Converter INL and DNL Estimation with a Distorted Sinusoidal Stimulus Signal

Testing high resolution ADCs using deterministic dynamic element matching

A Pipelined Interpolating Analog-to-Digital Converter with Reduced Nonlinearity Error

Signature Testing and Diagnosis of High Precision S? ADC Dynamic Specifications Using Model Parameter Estimation

New Dynamic Test Methods for Determination of Nonlinearity and Effective Resolution of A/D Converters

A High Linearity,13bit Pipelined CMOS ADC

A Refined Selected-Codes Linearity Test on Pipelined ADC

Low Power Pipelined A/D Converter in 0.6 Μm Technology