Abstract:This paper introduced a novel approach to enhance the vertical scanning angle of a large aperture 2D electromagnetic micromirror through the utilization of a cascaded torsional beam design. The primary objective was to increase the vertical scanning angle without compromising the robustness, which was achieved by optimizing the trade-off between the rotation angle and the first mode of resonant frequency. The cascaded design provides flexibility to either increase the outer frame's rotation angle without sacrificing torsional stiffness or enhance the torsion beam's stiffness while maintaining the same rotation angle, thus elevating the first-mode resonant frequency and overall robustness. The effectiveness of the cascaded design was demonstrated through a comparative study with a non-cascaded 2D micromirror possessing the same aperture size, torque, and mass moment of inertia. Theoretical analysis and finite-element simulation are employed to determine critical parameters such as the stiffness ratio between the cascaded torsion beams, and to predict improvements in the scanning angle and primary resonant frequency brought by the cascaded design. Prototypes of both cascaded and non-cascaded designs are fabricated using a flexible printed circuit board combined with Computer numerical control (CNC) machining of a Ti-alloy thin film, confirming the superior performance of the cascaded 2D micromirror. The cascaded design achieved vertical scanning angles up to 26% higher than the traditional design when both were actuated at close resonance frequencies. Additionally, the micromirror was successfully integrated into a 3D LiDAR system. The light detection and ranging (LiDAR) system was modelled in Zemax OpticStudio to find the optimized design and assembly positions.

Cascaded-prism Multi-Mode Beam Scanning Method for Three-Dimensional Imaging Lidar

Isotropic three-dimensional imaging with lattice light-sheet difference microscopy.

Risley-prism-based multi-beam scanning LiDAR for high-resolution three-dimensional imaging

A Fully Solid-State Beam Scanner for FMCW LiDAR Application

Design of 3D Laser Radar Based on Laser Triangulation

Cascaded laser scanning towards high-resolution LiDAR

Beam-Steering Based on Dispersive Optical Phased Array for FMCW LiDAR Application

A Hybrid Solid-State Beam Scanner for FMCW LiDAR Application.

Solid-state FMCW LiDAR with in-fiber beam scanner

Solid-state FMCW LiDAR with Two-Dimensional Spectral Scanning Using a Virtually Imaged Phased Array.

Spectrally Scanning LiDAR Based on Wide-Angle Agile Diffractive Beam Steering

A Hybrid Solid-State Beam Scanner for LiDAR Applications

Virtually Imaged Phased-Array-based 2D Nonmechanical Beam-Steering Device for FMCW LiDAR.

Adjustable Higher SNR and Long-Range 3D-Imaging Cluster Lidar Based on a Coded Full-Waveform Technique

A word of caution on implantable delivery systems.

Cascaded 2D Micromirror with Application to LiDAR

Swept Source Lidar: simultaneous FMCW ranging and nonmechanical beam steering with a wideband swept source

Pixel Multiplexing Technique For Real-Time Three-Dimensional-Imaging Laser Detection And Ranging System Using Four Linear-Mode Avalanche Photodiodes

Wide-field Multipass Spectral-Scanning 3D Imaging LiDAR Using an Echelle Grating

Multi-beam single-photon-counting three-dimensional imaging lidar

Picosecond Wide‐Angle Dynamic Beam Steering for Object Tracking