Abstract:Material extrusion additive manufacturing of metals has found widespread application and is typically thought of as a facile technique to create metal components. This can be undertaken without the need for energy sources typically used in direct energy deposition and powder bed fusion processes. Despite recent advances in achieving net shape and improvements to material/component integrity, these processes are characterized by performance limiting defects which often emerge as a result of deposition strategy and are retained post sintering. Although the debinding and sintering steps have been investigated for metal injection molding technology, quantitative studies of defect evolution are lacking. This work proposes an approach to study the pore evolution behavior from deposition to sintering through X-ray Computed Tomography (XCT) image processing. Quantitative results of pore shrinking, partial and full closure through backtracking of individual pores from the sintered to the green state are presented. It is shown that where pores are larger than 4 × 10 -6 mm 3 , equals to the D 90 of the feedstock metal particles, these cannot be fully closed upon sintering and will survive to limit the performance of the final part. The average pore shrinkage is by a factor of 5.6 and partial closure happens in pores with minimum Feret diameter of 33 μm, equals to 160% of the D 90 powder particle, or less. The utilization of overfill as a proposed technique in the literature for the elimination of macro pores is investigated, yielding disparate and unsatisfactory results. This discrepancy can be attributed to the insufficient formation of micro-channels within the pore structure during the deposition process of the aqueous feedstock, leading to regions of weak grain bonding. To evaluate the contribution of these to undermining material integrity, tensile tests of linear and circular deposition strategies are undertaken. Experiments show that track interface length plays a major role in determining elongation to failure and tensile strength. It is concluded that the limitation to the mechanical properties of metal paste extrusion components originates from the emergence of defects and their characteristics after the completion of the processing, as opposed to being influenced by the metallurgy prior or post sintering.

Dynamics of Pore Formation and Evolution During Multi-Layer Directed Energy Deposition Additive Manufacturing Via In-Situ Synchrotron X-ray Imaging: A Case Study on High-Entropy Cantor Alloy

Pore evolution mechanisms during directed energy deposition additive manufacturing

In Situ X-ray Imaging of Pore Formation Mechanisms and Dynamics in Laser Powder-Blown Directed Energy Deposition Additive Manufacturing

Revealing mechanism of pore defect formation in laser directed energy deposition of aluminum alloy via in-situ synchrotron X-ray imaging

In situ and Operando X-ray Imaging of Directed Energy Deposition Additive Manufacturing

High-speed Synchrotron X-ray Imaging of Directed Energy Deposition of Titanium: Effects of Processing Parameters on the Formation of Entrapped-Gas Pores

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing

In-situ High-Speed X-ray Imaging of Piezo-Driven Directed Energy Deposition Additive Manufacturing

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

A hybrid directed energy deposition process to manipulate microstructure and properties of austenitic stainless steel

Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding

Additive manufacturing of porous metals using laser melting of Ti6Al4V powder with a foaming agent

In-Situ Characterization of Pore Formation Dynamics in Pulsed Wave Laser Powder Bed Fusion

Effects of Oxidized Metal Powders on Pore Defects in Powder-Fed Direct Energy Deposition

Dynamics of the laser–powder interaction in the Ti6Al4V powder feeding process of laser-directed energy deposition additive manufacturing

Defect Evolution and Mitigation in Metal Extrusion Additive Manufacturing: from Deposition to Sintering

Porosity in wire-arc directed energy deposition of aluminum alloys: Formation mechanisms, influencing factors and inhibition strategies

Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing

Effect of Deposit Scale on Mechanical Properties of In-Situ Alloyed CrCoNi Medium Entropy Alloys Formed by Directed Energy Deposition

Experimental Quantification of Inward Marangoni Convection and Its Impact on Keyhole Threshold in Laser Powder Bed Fusion of Stainless Steel