Abstract:The electro-hydrostatic actuator(EHA) used in more electric aircraft(MEA) has been extensively studied due to its advantages of high reliability and high integration. However, this high integration results in a small heat dissipation area, leading to high-temperature problems. Generally,to reduce the temperature, a wet cooling method of using the pump leakage oil to cool the motor is adopted, which can also increase the difficulty of accurately predicting the system temperature in the early design stage. To solve this problem, a dynamic coupling thermal model of a wet EHA is proposed in this paper. In particular, the leakage oil of the pump is used as a coupling item between the electrical system and the hydraulic system. Then, an improved T-equivalent block model is proposed to address the uneven distribution of axial oil temperature inside the motor, and the control node method is applied to hydraulic system thermal modeling. Meanwhile, a dynamic coupling thermal model is developed that enables a dynamic evaluation of the wet EHA temperature. Then, experimental prototypes of wet motor and wet EHA are developed, while the temperature response of the wet motor at different rotation speeds and different loads and the temperature response of the wet EHA at no-load condition were verified experimentally at room temperature, respectively. The maximum temperature difference between the experimental and theoretical results of the wet motor as well as the experimental and theoretical results of the wet EHA is less than 8 °C. These test results indicate that the dynamic coupling thermal model is valid and demonstrate that the thermal coupling modeling method proposed in this paper can provide a basis for the detailed thermal design of EHA.

Simulation and Analysis of Dynamic Stiffness of Electro-hydrostatic Actuators

Design and Control of an Electrohydraulic Soft Actuator System for Robotic Grippers

Research on Simulation of Aircraft Electro-Hydrostatic Actuator Anti-Skid Braking System

Thermal-fluid-structure coupling analysis for valve plate friction pair of axial piston pump in electrohydrostatic actuator (EHA) of aircraft

Analysis of the dynamic performance of an electro-hydrostatic actuator and improvement methods

Design and Simulation of Electro-hydrostatic Actuator with a Built-in Power Regulator

Motion Control of Electro-Hydrostatic Actuators with Modeling and Compensation of Nonlinear Bulk Modulus

Modeling Simulation and Experimental Research on Electro-hydrostastic Actuator (EHA)

Analysis of the Cylinder Block Tilting Inertia Moment and Its Effect on the Performance of High-Speed Electro-Hydrostatic Actuator Pumps of Aircraft

Thermal-hydraulic Modeling and Simulation of the Hydraulic System based on the Electro-hydrostatic Actuator

Dynamic Thermal Coupling Modeling and Analysis of Wet Electro-Hydrostatic Actuator

Active Load-Sensitive Electro-Hydrostatic Actuator for More Electric Aircraft

Design and Performance Analysis of a Dual-Variable Electrohydrostatic Actuator for Aerospace Application

Modeling and Simulation of Multi-Gear Aircraft Braking System Based on EHA

Dynamical Characteristics of a Hydraulic Soft Actuator with Three Degrees of Freedom

Design, Simulation and Analysis of Integrated Electrical Hydrostatic Actuator

Multi-discipline Simulation of Electro-Hydrostatic Actuator with Modelica

Effect of Piston-Slipper Assembly Mass Difference on the Cylinder Block Tilt in a High-Speed Electro-Hydrostatic Actuator Pump of Aircraft

Thermal Characteristic and Analysis of Electro-Hydrostatic Actuator

Modeling and Control of a Novel Electro-Hydrostatic Actuator with a Three-Ports Hydraulic Pump

Complex Mathematical Model of Electro-hydraulic Load Simulator Including Multi-stiffness and Nonlinear Factors in Ultimate Performance Research