Abstract:Shear deformation and nonlinearity are the two main variables that influence the bending behavior of soft actuators with thick cross-sections. However, in most dynamic studies of these actuators, either one such variable is taken into consideration or both are disregarded, resulting in substantial inaccuracies in predicting their dynamic responses. In this work, we present an analytical dynamic model based on Euler–Lagrange dynamics, to predict the bending behavior of a soft pneumatic actuator with symmetrical fluidic chambers, which can capture the shear deformation of the actuator while preserving its nonlinear characteristics. Inspired by the finite element method, we divided the actuator into several regions and calculated the strain potential energy of each region separately. The coupling between different regions was described as geometric constraints based on the constant curvature (CC) model. As the inertia term of the dynamic model, the actuator’s kinetic energy was evaluated under an assumption that the actuator’s mass distributes along the center line of the neutral layer. These efforts allowed the model to preserve the nonlinearity of the deformation while ensuring its simplicity. By looking for the minimum value of the stress potential energy, the shear deformation of the actuator was assessed. Experiments were carried out to determine the actuator’s damping properties, investigate the influence of the gas line on the actuator’s dynamic behavior, and validate the model at fluidic pressure with different frequencies. The dynamic model’s predictions for transient and steady stages were found to be in good agreement with experimental data. The model’s application to other soft actuators with a similar structure was discussed at the end.

Dynamical Characteristics of a Hydraulic Soft Actuator with Three Degrees of Freedom

Design And Modeling Of A Hydraulic Soft Actuator With Three Degrees Of Freedom

Simplified Dynamical Model and Experimental Verification of an Underwater Hydraulic Soft Robotic Arm

Artificial muscle driven soft hydraulic robot: electromechanical actuation and simplified modeling

Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Design and Control of an Electrohydraulic Soft Actuator System for Robotic Grippers

A Computationally Efficient Dynamical Model of Fluidic Soft Actuators and Its Experimental Verification

An Electrohydraulic Control Device with Decoupling Effect for Three-Chamber Soft Actuators

A Dynamical Model with Order Reduction for a Fluidic Bending-Type Soft Actuator

An Experimental Study of Bellows-Type Fluidic Soft Bending Actuators under External Water Pressure

Modeling and Experimental Evaluation of Dynamic Behavior of a Soft Bending Actuator with Symmetrical Fluidic Chambers

Parameter Identification and Model-Based Nonlinear Robust Control of Fluidic Soft Bending Actuators

Kinematics and Dynamic Modeling of a Planar Hydraulic Elastomer Actuator

Fiber-Reinforced Soft Bending Actuator Control Utilizing On/Off Valves

Dynamic Modeling and Experimental Validation of a Water Hydraulic Soft Manipulator Based on an Improved Newton-Euler Iterative Method.

Fabrication, Mechanical Modeling, And Experiments Of A 3d-Motion Soft Actuator For Flexible Sensing

Design and control of a 3-chambered fiber reinforced soft actuator with off-the-shelf stretch sensors

Design and Modeling of a Soft Bending Actuator

Design, Fabrication and Experiments of a 3D-Motion Soft Elastomer Actuator

Optimization design and experiment study on a water hydraulic flexible actuator integrating flexible inner skeleton and soft external skin used for underwater flexible gripper

Fluidic Multichambered Actuator and Multiaxis Intrinsic Force Sensing