Abstract:The use of an Al2(SO4)3‐based electrolyte allows increase the discharge voltage of Zn–MnO2 batteries by enhancing the Mn4+/Mn2+ electrochemical contribution. Rechargeable aqueous Zn–MnO2 batteries are attracting attention as a cost‐effective and safe energy storage solution, but their commercialization faces challenges due to limited stability, output voltage, and energy density. Herein, a hybrid‐ion Zn–MnO2 system with enhanced Mn4+/Mn2+ electrochemical contribution is introduced using an Al3+‐based electrolyte. Compared with conventional Zn2+ electrolytes, the hybrid Al3+/Zn2+ cell offers higher output voltage of 1.75 V, capacities up to 469 mAh g−1, and outstanding energy densities up to ≈730 Wh kg−1 at 0.3 A g−1. Besides, the Al3+‐enabled Zn–MnO2 battery shows 100% capacity and energy density retention after 10,000 cycles at 2 A g−1. Even at a high mass–loading of 6.2 mg cm−2, a capacity of ≈200 mAh g−1 is maintained for over 100 cycles. This outstanding performance is related to the contribution of different intercalation and reaction mechanisms, as proved by the combination of electrochemical analysis and ex‐situ x‐ray diffraction characterization of the cells at different discharge stages. Al3+ ions, as Lewis strong acid, contribute to capacity in two significant ways: through a highly reversible intercalation/de‐intercalation that substantially boosts capacitance at low current rates, and promoting the Mn4+/Mn2+ reaction aided by H+ that dominates the capacitance at higher current rates. Overall, this work demonstrates a practical Zn–MnO2 battery with a high potential for low‐cost stationary energy storage habilitated by multiple ion co‐intercalation.

Sodium Ion Batteries: Toward High Energy Density All Solid‐State Sodium Batteries with Excellent Flexibility (adv. Energy Mater. 12/2020)

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

A High Energy Density Aqueous Battery Achieved by Dual Dissolution/Deposition Reactions Separated in Acid‐Alkaline Electrolyte

High-Energy Aqueous S-MnO2 Batteries with Redox Charge Carriers

Jahn–Teller Distortion Induced Mn2+‐Rich Cathode Enables Optimal Flexible Aqueous High‐Voltage Zn‐Mn Batteries

A Room‐Temperature All‐Solid‐State Na‐Ag Battery with a Long Cycle Life and Low Overpotential

Jahn–Teller Distortion Induced Mn 2+ ‐Rich Cathode Enables Optimal Flexible Aqueous High‐Voltage Zn‐Mn Batteries

Mixed phase sodium manganese oxide as cathode for enhanced aqueous zinc-ion storage

High‐Energy Density Aqueous Alkali/Acid Hybrid Zn–S Battery

Sodium Ion Pre-Intercalation of δ-MnO2 Nanosheets for High Energy Density Aqueous Zinc-Ion Batteries

A durable ZnS cathode for aqueous Zn-S batteries

Aqueous MnV 2 O 6 ‐Zn Battery with High Operating Voltage and Energy Density

Unravelling H+/Zn2+ Synergistic Intercalation in a Novel Phase of Manganese Oxide for High-Performance Aqueous Rechargeable Battery

A rechargeable aqueous zinc/sodium manganese oxides battery with robust performance enabled by Na2SO4 electrolyte additive

Molten salt synthesis of α-MnO2/Mn2O3 nanocomposite as a high-performance cathode material for aqueous zinc-ion batteries

MnO Stabilized in Carbon‐Veiled Multivariate Manganese Oxides as High‐Performance Cathode Material for Aqueous Zn‐Ion Batteries

Zn–S Hybrid Batteries: Maximizing Energy Storage of Flexible Aqueous Batteries through Decoupling Charge Carriers (Adv. Energy Mater. 14/2021)

Improved Mn4+/Mn2+ Contribution in High‐Voltage Zn–MnO2 Batteries Enabled by an Al3+‐Ion Electrolyte

Rechargeable Zn−MnO 2 Batteries: Progress, Challenges, Rational Design, and Perspectives

An Advanced High‐Entropy Fluorophosphate Cathode for Sodium‐Ion Batteries with Increased Working Voltage and Energy Density (Adv. Mater. 14/2022)

Biomass Solid‐State Electrolyte with Abundant Ion and Water Channels for Flexible Zinc‐Air Batteries