Abstract:Developing an adsorbent with high adsorption capacity and high selectivity is of great importance for the post-combustion CO2 capture. Inspired by the theoretical calculation findings that the introduction of alkali metal atoms (e.g., Li, Na, and K) into the carbon framework can significantly increase the CO2 adsorption capacity through the enhanced electrostatic interaction, herein, we have successfully developed a series of alkali metal doped carbons through a simple and effective strategy. The systematic characterization results prove that alkali metals are uniformly introduced into the carbon framework without changing the pore size distribution and amorphous structure of the original material, but slightly reducing the specific surface area. The adsorption performances from the static adsorption and the dynamic breakthrough experiments with a binary mixture of CO2/N2 (15/85, v/v) reveal that the doping of alkali metals can greatly enhance the capture and separation of CO2, in which the lithium-doped porous carbon presents the best CO2 uptake of 4.1 mmol/g at 25 °C (48.3% higher than that of undoped carbon) with the highest CO2/N2 selectivity of 47 and fastest adsorption rate. The high adsorption capacity and selectivity presented are comparable to the data reported in the previous literature. The density functional theory and grand canonical Monte Carlo molecular simulation results demonstrate that, compared with N2, alkali metal doped carbon has a stronger binding energy and higher adsorption density for CO2 and thus increases the CO2/N2 selectivity to a greater extent. This proof-of-concept work paves an alternative way for the development of high-performance CO2 adsorbents.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c02313.Computational methodology; XPS O 1s spectra of the as-prepared samples; TEM mapping images; nitrogen adsorption isotherms collected at 25 °C; breakthrough curve for humid mixtures; DFT binding energy calculations; Freundich model fitted CO2 adsorption isotherms (PDF)This article has not yet been cited by other publications.

Biomass-derived Sulfur-Doped Porous Carbon for CO 2 and CH 4 Selective Adsorption

Pillared-layer Ultramicroporous Material for Highly Selective SO2 Capture from CO2 Mixtures

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Sulfur-Doped porous carbon Adsorbent: A promising solution for effective and selective CO 2 capture

Effect of Porosity Parameters and Surface Chemistry on Carbon Dioxide Adsorption in Sulfur-Doped Porous Carbons

Synthesis and characterization of polyphenylene sulfide resin-derived S-doped porous carbons for efficient CO 2 capture

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Preparation of sulfur-doped microporous carbons for the storage of hydrogen and carbon dioxide

One-pot synthesis of self S-doped porous carbon for efficient CO2 adsorption

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Sustainable Biomass Glucose-Derived Porous Carbon Spheres with High Nitrogen Doping: As a Promising Adsorbent for CO2/CH4/N2 Adsorptive Separation

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Self-Activating Approach for Synthesis of 2,6-Naphthalene Disulfonate Acid Disodium Salt-Derived Porous Carbon and CO 2 Capture Performance

Removal of Toluene and SO2 by Hierarchical Porous Carbons: a Study on Adsorption Selectivity and Mechanism

Facile preparation of N-doped porous carbon and its CO2 gas adsorption performance

Preparation of Porous Carbon Materials Derived from Hyper-Cross-Linked Asphalt/Coal Tar and Their High Desulfurization Performance

N-rich chitosan-derived porous carbon materials for efficient CO2 adsorption and gas separation

A facile approach to the preparation of S-doped porous carbons for CO 2 adsorption

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Synthesis of Alkali Metals Functionalized Porous Carbon for Enhanced Selective Adsorption of Carbon Dioxide: A Theoretically Guided Study