Abstract:The surface modification by ultra-fast laser could regulate the mechanical properties of hard and brittle materials. Since silicon carbide (SiC) is too hard to be machined with acceptable removal rate and quality by mechanical abrasives, and femtosecond laser (fs-laser) assisted grinding could be a potential method to improve the machinability of SiC. Under fs-laser modulating, SiC surface could be modified to generate laser-induced periodic surface structures (LIPSS). Understanding the mechanical properties and material removal mechanism of the LIPPS surface is crucial to accomplish a high efficiency and quality machining process. This paper aims to investigate the effects of fs-laser modification on the mechanical properties, removal mechanism, removal efficiency, and microstructure changes of 4H-SiC surface during removal, together with those of the original 4H-SiC surface for comparison. The hardness and elastic recovery ability of the modified layer are determined by nanoindentation test, and the nano-scratch test is adopted to study the materials removal behavior. The removal efficiency and the quality of the modified surface is significantly improved. Phase transformation is observed in the scratching area, which reveals the existence of ductile mode removal. Moreover, the stress distribution and the change of scratching force on the surface of SiC before and after modification are studied by finite element method (FEM). The results show that the stress distribution and transmission when scratched on the modified surface is lower than that of the original surface, and the scratching force under the same scratch conditions is greatly reduced. With the understanding of materials removal behavior from the whole process of deformation, phase transformation, and separation of LIPPS from substrate, then the fs-laser modification of SiC could be evidenced as an effective method to improve the grinding efficiency and quality in mass production of industry.

Nanosecond Laser Irradiation Assisted Chemical Mechanical Polishing (CMP) Process for Promoting Material Removal of Single Crystal 4H-Sic

Picosecond Laser-Assisted Chemical Mechanical Polishing (CMP): Aiming at the Si-Face of Single-Crystal 6H-Sic Wafer

Femtosecond laser modification of silicon carbide substrates and its influence on CMP process

Improved Chemical Mechanical Polishing Performance in 4H-Sic Substrate by Combining Novel Mixed Abrasive Slurry and Photocatalytic Effect

Chemical Mechanical Polishing (CMP) of On-Axis Si-face 6H-Sic Wafer for Obtaining Atomically Flat Defect-Free Surface

Surface Micromorphology and Nanostructures Evolution in Hybrid Laser Processes of Slicing and Polishing Single Crystal 4H-Sic

Removal mechanism on 4H–SiC single crystal by picosecond laser ablation-assisted chemical mechanical polishing (CMP)

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Mechanism of chemical and mechanical mutual promotion in photocatalysis-assisted chemical mechanical polishing for single-crystal SiC

Materials removal mechanism of single crystalline SiC with laser-induced periodic surface structures (LIPSS)

Investigation on Material Removal Mechanisms in Photocatalysis-Assisted Chemical Mechanical Polishing of 4H–SiC Wafers

Recent Advances In Silicon Carbide Chemical Mechanical Polishing Technologies

Improving Polishing Efficiency of RB-SiC through Femtosecond Laser Pretreatment

Oxidation Anisotropy of 4H-Sic Wafers During Chemical-Mechanical Polishing

Combination of Plasma Electrolytic Processing and Mechanical Polishing for Single-Crystal 4H-SiC

Photocatalytic assisted chemical mechanical polishing for silicon carbide using developed ceria coated diamond core-shell abrasives

Investigation On Smoothing Silicon Carbide Wafer With A Combined Method Of Mechanical Lapping And Photocatalysis Assisted Chemical Mechanical Polishing

A Review on Precision Polishing Technology of Single-Crystal SiC

Study of Femtosecond Laser Ablation and Polishing Process on 4H-SiC Substrate

Centimeter-scale low-damage micromachining on single-crystal 4H–SiC substrates using a femtosecond laser with square-shaped Flat-Top focus spots

Photocatalysis-Assisted Chemical Mechanical Polishing of SiC Wafer Using a Novel SiO2@TiO2 Core-Shell Composite Nanoparticles Slurry