Abstract:The interactions of femtosecond lasers with gold targets were investigated with a numerical method combining molecular dynamics (MD) and the two-temperature model (TTM). Previous works using MD-TTM method did not consider all the thermodynamic parameters and the interatomic potential dependent of the electron temperature simultaneously. Therefore, we developed a LAMMPS function to achieve this. To accurately capture the physics behind the interactions, we also included the electron blast force from free electron pressure and the modified Fourier law with steep electron temperature gradient in our model. For bulk materials, a stress non-reflecting and heat conducting boundary is added between the atomistic and the continuum parts. The modified boundary force in our study greatly reduces the reflectivity of the atomistic-continuum boundary compared with its original form. Our model is the first to consider all these factors simultaneously and manage to predict four femtosecond laser ablation phenomena observed in the experiments. In this dissertation, the thermodynamic parameters in the two-temperature model were extensively explored. We considered three different approaches to calculate these parameters: namely interpolation, ab initio calculation, and analytical expression. We found that simple interpolation between solid state and plasma state could lead to high level of inaccuracy, especially for electron thermal conductivity. Therefore, ab initio calculation and analytical expression were used for the calculation of the thermodynamic parameters in more advanced studies. The effects of electron thermal conductivity and electron-phonon coupling factor on electron and lattice temperatures were analyzed.Our studies considered electron temperature dependent (ETD) and electron temperature independent (ETI) interatomic potentials. The ETI interatomic potential is easier to implement and therefore it is used in our phase change study to investigate the effects of target thickness on melting. Homogeneous melting occurred for thin films, while melting can be observed through the movement of the solid-liquid interface in thick or bulk materials. However, the ETI potential overestimated the bond strength at high temperatures. Therefore, ablation process was studied with the ETD potential. Three ablation mechanisms were found in our simulations at different laser fluences. Short nonthermal ablation was only observed at the ablation threshold. With increasing laser fluence, spallation was then seen. In high laser fluence regime, phase explosion occurred on the surface and coexisted with spallation.Lastly, we researched on the effects of the delay time between two femtosecond laser pulses. Various delay times did not have much influence on melting depth. In low laser fluence regime, with increasing delay time, the target went through nonthermal ablation, to spallation and to no ablation. In high laser fluence regime, longer delay time encouraged phase explosion while suppressed spallation.

Atomistic Insight on Temperature-Dependent Laser Induced Ultrafast Thermomechanical Response in Aluminum Film

Molecular Dynamics Simulation Of Ultra-Fast Thermal Transition In Thin Foil Irradiated By High Power Ultra-Short Laser

Molecular Dynamics Investigation Of Phase Change Induced By Ultrafast Laser Irradiation

A Thermo-mechanical Investigation on Laser Ablation of Aluminum Alloy

Numerical Insight into Heat Transfer in Surface Melting and Ablation Subject to Femtosecond Laser Processing Aluminum

Integrated Continuum-Atomistic Modeling of Nonthermal Ablation of Gold Nanofilms by Femtosecond Lasers

An Atomic-Level Study of Material Ablation and Spallation in Ultrafast Laser Processing of Gold Films

Thermal Analysis of Intense Femtosecond Laser Ablation of Aluminum

Spatiotemporal Insights into the Femtosecond Laser Homogeneous and Heterogeneous Melting Aluminum by Atomistic-Continuum Modeling

Atomic-Level Study of A Thickness-Dependent Phase Change in Gold Thin Films Heated by an Ultrafast Laser

Investigation of Thermomechanical Responses in Ultrafast Laser Heating of Metal Nanofilms

Ultrafast melting, spallation, and phase explosion in femtosecond laser processing on nickel film surface investigated by atomistic simulation and transient reflectivity microscopy

Ultrafast Dynamics and Ablation Mechanism in Femtosecond Laser Irradiated Au/Ti Bilayer Systems

Melting and Thermal Ablation of a Silver Film Induced by Femtosecond Laser Heating: a Multiscale Modeling Approach

Study of Femtosecond Ablation on Aluminum Film with 3D Two-Temperature Model and Experimental Verifications

Thermal Behavior of Thin Metal Films Irradiated by Shaped Femtosecond Pulse Sequences Laser

Ultrafast atomic view of laser-induced melting and breathing motion of metallic liquid clusters with MeV ultrafast electron diffraction

Continuous GHz femtosecond laser interacting with aluminum film: Simulation and experiment

PHASE CHANGE AND ABLATION STUDY OF METALS BY FEMTOSECOND LASER IRRADIATION USING HYBRID TTM/MD SIMULATIONS

Unveiling of incubation and absorption-enhanced effects occurring during multi-shot femtosecond laser ablation of aluminum and steel surfaces

Mechanisms of femtosecond laser ablation of Ni3Al: Molecular dynamics study