Experimental and Numerical Study on the Damage Evolution and Acoustic Emission Multi-Parameter Responses of Single Flaw Sandstone under Uniaxial Compression

Xing -Yuan Jiang,Di Wu,Zhen-Xian Zhao,Yi Yang,Jun -Wei Tian,Fu -Lin Wang

DOI: https://doi.org/10.1016/j.tafmec.2024.104535

IF: 4.374

2024-01-01

Theoretical and Applied Fracture Mechanics

Abstract:Cracks are generally the weakest position in engineering rock mass. It is of great practical significance to study the influence of cracks on the fracture process of rock mass and the precursor criterion of failure for disaster prevention and mitigation projects. In this paper, particle flow program (PFC2D) is used to analyze the mechanical strength and damage evolution of fractured rock. The multi-parameter stage characteristics of acoustic emission (AE) and the difference of fracture precursor information of fractured rock mass under uniaxial compression (UC) are explored. The results are as follows: (1) The strength and modulus of elasticity of fractured rock samples are smaller than that of intact rock mass, and increase in quadratic function with the increase of fracture angle, and the strength of B-90 sample is closest to intact rock samples; (2) The PFC analysis shows that the cracks in the defective rock samples all originate from the tip of the prefabricated crack, and the crack initiation angle is basically in the range of 60 degrees similar to 90 degrees. The loading process mainly produces tensile damage, and the number of tensile cracks are far more than that of shear cracks. Compressive stress and tensile stress increase with the increase of load, but the force chain of failure surface is the smallest after complete failure of rock; (3) The acoustic emission ringing number, RA/AF value, b value and entropy value of sandstone have obvious stage characteristics, the main frequency signal is mainly low frequency signal, and large-scale cracks are mainly produced in the failure process. The sudden increase point of AE ringing times and RA/AF value accumulation curve can be used as critical failure point. The fluctuation of B value and entropy value reflects the instability of fracture development, and "cliff-like" descending point and ascending point can be regarded as the precursor of critical failure of rock; (4) The failure precursor of acoustic emission parameters of sandstone appears in the peak load period of 85 %-98 %. The order of response time of different parameters is: cumulative RA/AF value, cumulative event number, entropy value, B value. The response time of B-45 and B-15 is earlier, while that of B-60 and B-30 is later. The research results are expected to deepen the understanding of the relevant standards of damage evolution and failure precursors of defective rocks in engineering applications.