Abstract:Highlights • Metallization in FeCO 3 reduction with H 2 increases with increasing temperature. • At 1023 K, 91 wt% elemental iron with the remaining iron being wüstite were formed. • 3 simultaneous reaction pathways occur: FeCO 3 to FeO, FeCO 3 to Fe and FeO to Fe. • Avrami-Erofeyev model and reaction-order models describe the reaction kinetics. Direct reduction of mineral iron carbonate with hydrogen is a CO 2 -lean technology for the production of elemental iron from iron carbonate ore. In this study, the reaction mechanism and reaction kinetics were investigated by thermogravimetric analysis and in a fixed-bed tubular reactor. The degree of metallization increases with increasing temperature from 773 to 1023 K. At 1023 K, the degree of metallization is 93 wt%, with the remaining iron species being wüstite. The reduction proceeds via two reaction pathways: calcination of iron carbonate to wüstite with consecutive reduction of wüstite to elemental iron and direct reduction of iron carbonate to elemental iron. The reaction steps occur simultaneously. During the first hour of reaction, which corresponds to the heat-up phase, calcination of iron carbonate to wüstite adopts the dominant reaction path. Then wüstite reduction and direct iron carbonate reduction with hydrogen to elemental iron, become dominant, facilitated by the increasing porosity of the ore due to the release of CO 2 . Towards the end of the reduction process the remaining wüstite is reduced to elemental iron. The kinetic triplet – solid phase reaction kinetic model, activation energy and frequency factor – was determined for each reaction step. The reaction kinetics can be described by a combination of an Avrami-Erofeyev model (A3 model for iron carbonate calcination to wüstite), and reaction-order models (F2 model for the reduction of iron carbonate to elemental iron and F3 model for the reduction of wüstite to elemental iron). Graphical Download : Download high-res image (262KB) Download : Download full-size image

Multistep Kinetic Study of Magnetite Reduction by Hydrogen Based on Thermogravimetric Analysis

Kinetics and microstructural changes during fluidized reduction of magnetite with hydrogen at low temperatures

Multistep Kinetic Study of Fe2O3 Reduction by H2 Based on Isothermal Thermogravimetric Analysis Data Deconvolution

Kinetic Analysis of Isothermal and Non-Isothermal Reduction of Iron Ore Fines in Hydrogen Atmosphere

Influence of a Prior Oxidation on the Reduction Behavior of Magnetite Iron Ore Ultra-Fines Using Hydrogen

Kinetic analysis of iron ore powder reaction with hydrogen—carbon monoxide

Kinetic Analysis of Molten Oxide Reduction Using Bottom-Blown Hydrogen Injection

Studies on the Reduction Behavior of Iron Oxide Pellet Fines with Hydrogen Gas: Mechanism and Kinetic Analysis

Kinetics analysis of direct reduction of iron ore by hydrogen in fluidized bed based on response surface methodology

Reduction kinetics of iron ore concentrate particles relevant to a novel green ironmaking process

Reduction kinetics of iron oxide pellets with H2 and CO mixtures

Parametric study on hematite pellet direct reduction by hydrogen

Kinetic Mechanism Development for the Direct Reduction of Single Hematite Pellets in H2/CO Atmospheres

Kinetic Analysis of the Iron Oxide Reduction Using Hydrogen-Carbon Monoxide Mixtures as Reducing Agent

Thermodynamic analysis and experimental verification of the direct reduction of iron ores with hydrogen at elevated temperature

Parameter Optimization for Hydrogen-Induced Fluidized Bed Reduction of Magnetite Iron Ore Fines

A Review on the Kinetics of Iron Ore Reduction by Hydrogen

Hydrogen-based direct reduction of combusted iron powder: deep pre-oxidation, reduction kinetics and microstructural analysis

Reaction kinetics of direct reduction of mineral iron carbonate with hydrogen; determination of the kinetic triplet

Reduction Kinetics of Fine Hematite Ore Particles with a High Temperature Drop Tube Furnace

A Laboratory Study of the Reduction of Iron Oxides by Hydrogen