Abstract:To improve the structural performance of precast assembled concrete piers under earthquake, we designed and manufactured two piers confined by carbon fiber reinforced polymer (CFRP) sheets (SPCC1, SPCC2), two piers confined by glass fiber reinforced polymer (GFRP) tubes (SPCG6, SPCG10), and one comparison pier (SPC). The column and bent cap connections were designed with a monolithic construction, whereas the column and pile cap connections had precast joints with grouted sleeves. The effects of the CFRP and GFRP on the seismic performance of the specimens were studied using a quasi-static test and a fiber model based on OpenSees. The failure modes of the specimens included concrete crushing in the plastic hinge zone and buckling fracture of the longitudinal reinforcement. A CFRP tensile fracture occurred in the plastic hinge zone at the top and bottom of the piers; however, damage to the GFRP tubes was minor. Compared with sample SPC, the maximum bearing capacities of SPCG6, SPCG10, SPCC1, and SPCC2 increased by 8.4%, 3.1%, 15.0%, and 4.8%, respectively. At 7% displacement, the residual bearing capacities of SPCG6, SPCG10, SPCC1, and SPCC2 increased by 103.3%, 90.4%, 36.7%, and 82.8%, respectively, compared with SPC. At 6% and 7% displacement, the average stiffness of the CFRP/GFRP-confined specimens increased by 46.2%/58.9% and 59.8%/96.8%, respectively, compared with that of the unconfined specimen. The curvature results also showed that the confined pier exhibited a better flexural performance in most loading processes. The test and simulation results showed that the connection strength of the grouted sleeve in the precast structure should be ensured, and the reinforcement ratio of the pier should be prioritized, followed by an appropriate improvement in the compressive strength of the concrete. The constraint range of the FRP at twice the height of the plastic hinge zone was sufficiently conservative to ensure that the pier maintained good seismic performance under a high axial compression ratio. In practical engineering, the use of a GFRP tube as a template for a prefabricated pier is recommended, and a CFRP sheet is used to strengthen the plastic hinge area of an existing pier with insufficient seismic ability.

Performance-based Assessment of the Novel Prefabricated CFST Bridge Pier by Numerical Approach

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Seismic Behavior of Prefabricated Thin-Walled CFST Double-Column Bridge Piers

Study on Seismic Performance Optimization of Assembly Concrete-Filled Steel Tubular (CFST)-Laced Piers

Novel Fiber-Based Seismic Response Modelling and Design Method of Partially CFST Bridge Piers Considering Local Buckling Effect

Numerical Simulation Analysis of the Seismic Performance of Precast Bridge Piers

QUASI-STATIC TEST STUDY ON PRECAST ECC CONCRETE-FILLED TUBULAR BRIDGE PIERS

Seismic Behavior of a Novel Prefabricated Thin-Walled CFST Double-Column Pier System for Simple On-Site Assembly

Seismic Study on Bridge Piers Reinforced with CSFRC in Local Region

Numerical study of the seismic performance and damage mitigation of steel–concrete composite rigid-frame bridge subjected to across-fault ground motions

Numerical and Experimental Study on Seismic Performance of Bridge Piers by Steel Fiber Reinforced Concrete

Numerical Investigation of the Performance of Segmental CFST Piers with External Energy Dissipators under Lateral Cyclic Loadings

Quasi-static tests and seismic fragility analysis of RC bridge piers with high-strength steel bars and high-strength/ultra-high performance concrete

Experimental and numerical investigation of the seismic performance of hollow rectangular bridge piers constructed with and without steel fiber reinforced concrete

Seismic Performance of Concrete-Encased Cfst Piers: Experimental Study

Probabilistic Seismic Vulnerability and Loss Assessment of a Seismic Resistance Bridge System with Post-Tensioning Precast Segmental Ultra-High Performance Concrete Bridge Columns

Numerical Simulation of Prefabricated Prestressed Bridge Piers Based on Fiber Beam Element

Seismic Performance of FRP-Confined Precast Assembled Concrete Piers: An Experimental Study

Numerical Investigations on Seismic Behavior of Segmental Assembly of Concrete Filled Steel Tube Piers with External Replaceable Energy-Dissipating Links

Shaking Table Test on Seismic Performance of Continuous Rigid Frame Bridge with Cast-in-place and Fabricated Super High Piers

Seismic Performance of SFRC Piers under Reversed Cyclic Loading